Cisco Meraki MR76 Wi-Fi 6 Outdoor AP

Product Information

An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR76enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.

The dual-band 4×4:4 outdoor APs (such as the MR84 and MR86) have both the 2.4 GHz and 5 GHz radios diplexed onto each antenna port, thus dual-band antennas should be paired with those APs.) All dual-band 2×2:2 outdoor APs (such as the MR74 and MR76) have two sets of mount points: the top two are for the 2.4GHz radio, the bottom two are for the 5GHz radio. Meraki offers a number of antenna options for the MR76access point. The MR76features dual band antenna ports thus dual band antennas should be paired with the AP. Below is a highlight of the different antenna types and their applications. It is always best practiceto consultwith a Cisco SE or Partner in to select the best antenna for the unique design.ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Article 12: For those low-power radio-frequency devices that have alreadyfrequency devices that have alreadyreceived a type-approval, companies,business units or users should notchange its frequencies, increase itspower or change its original featuresand functions.

The equipment is used in areas without exposure to harmful and dangerous production factors, unless otherwise specified in the operational documentation and/or on the equipment labeling. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WEP**, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)** An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR76 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.The MR76 provides a maximum of 1.7 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.

Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritised correctly, not only on the MR76, but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones. Do not throw in the device with household waste. The technical equipment is subject to storage and disposal in accordance with the organization's disposal procedure. and 40 MHz channels (802.11n); 20, 40 and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) Sector/patch antennas have two connectors. Both of these connectors must be attached to the same radio, a single sector/patch antenna should not be attached to both the top and bottom of the access pointAn integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR76 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies. Automatic cloud-based RF optimisation party antennas may be used but it is the responsibility of the end customer/partner to ensure operation is within regulatory compliance. The equipment is subject to installation and maintenance by specialists with the appropriate qualifications, sufficient specialized knowledge, and skills. Omni directional antennas are best for pole mounts applications and for mesh networks. Use omni directional antennas when designingto cover 360 degrees around the Access Point.

Sector antennas are ideal for building mounts as they target the signal away from the interior spaces of the building and focus the energy to the larger outdoor space. This antenna is ideal for exterior building use but may also be used for some mesh network designs. Patch AntennaThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 34mmbetween the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Omni directional antennas are best for pole mounts applications and for mesh networks. Use omni directional antennas when designing to cover 360 degrees around the Access Point. Sector Antenna The Meraki MR series is the world's first enterprise-grade line of cloud-managed WLAN access points. Designed for challenging enterprise environments, the MR access points use advanced Wi-Fi 6 technologies including MU-MIMO, OFDMA, beam forming and channel bonding to deliver the throughput and reliable coverage required by demanding business applications. Class- Leading Enterprise Features