SDRTOP Electric Mortar Grouting Machine Portable Cement Caulking Gun 4.7L Filling Grouting Tool with 2 Nozzles for Brick Walls Floors Pointing

Product Information

Quikpoint TURBO Pointing attachment on a Makita DHP458Z 18 volt Cordless drill (see below regarding Batteries and Charger) New in May 2023, the TURBO auger will fit any Quikpoint device supplied after 2012. It differs from the previous Quikpoint PLUS auger in having a revised pitch and a reducing diameter spiral that extends all the way to the nozzle tip. This results in more powerful mortar delivery and the ability to process stiffer and more gritty mixes. The tip blade set previously required with with the Quikpoint PLUS auger is not needed with the TURBO auger. Unbreakable polyurethane auger barrel and nozzle holder. Takes just 10 seconds to reload 1/2 gallon hopper. Wide Range of Applications: This grout gun is not limited to grouting mortar joints. It can be used in conjunction with air compressors, mortar spraying, plastering, stuccoing, small-scale concrete injection, and floor mixtures. Its versatility and compatibility make it an invaluable tool for various construction and renovation projects. We supply more than 60% of Quikpoints as attachments (without a drill) and rarely get queries regarding drill suitability. But we are available to advise and assist if required.

Battery drills - a corded mains drill will always deliver better performance but there are numerous instances of battery drills being attached to Quikpoints. Handy for restricted or challenging jobs such as repointing chimneys. vdw 850 is a particularly high performance and extremely durable, self compacting, epoxy bound paving jointing mortar for pedestrian, light and medium vehicular traffic loads, including larger vehicles and mechanical road sweepers, pressure water jetting etc, etc. for clients who already have Makita cordless products, with a 'naked' DHP458Z drill (no batteries or charger)A few seconds with the Quikpoint scoop vs unscrewing and withdrawing plunger, filling narrow tube, refitting plunger etc. Quikpoint permits fast and consistent joint filling to realistic depths across a range of joint widths, with little effort. Specially designed nozzle with 4 interchangeable steel tips (small: 3/16" X 0.8", medium: 1/4" X 0.8", large: 0.55" X 0.66", and special angled tip for overhead work 1/4" x 0.8"). Nozzle rotates for horizontal and vertical joints.

The QUIKPOINT DRILL-MATE MORTAR GUN is easily mounted to all 3/8 inch variable speed drills, corded or un-corded. With its auger drive and hardened steel tip-blades (to prevent plugging and vibrator feed), the DRILL_MATE can handle standard and pre-mixed mortars and makes anyone an expert pointer. The Quikpoint is a definite time and money saver. Just scoop mortar in to the 3 quart capacity hopper, pull the trigger on the drill and a continuous controlled bead of mortar can be applied up to 5 times faster than conventional pointing methods, to any masonry application. Quikpoint will hold more mortar than the typical mastic gun - typically 2L-3L - so fewer stops to refill. Handheld pointing guns are a popular alternative to repointing with a mortar hawk and trowel. They are relatively low cost, lightweight and require no power (other than a strong wrist). So, what’s better about the Quikpoint approach?

Quikpoint at 30

Suitable for extremely fast self compacting aplication, with no delays or waiting (or additional costs!), even in continuously wet weather and at colder temperatures. This is because as the material can be applied in the rain - and in cold (non-freezing) conditions it can still be applied and will continue to cure when temperatures increase above 8-10 degrees C. About Quikpoint PLUS - we have created the new PLUS configuration by the addition of a strengthened auger which has been hardened (heat-treated) to provide greater wear resistance. The hardened auger has been available as a replacement item for some time and is proven to last significantly longer than the previous factory-fitted standard auger. The smaller the better - avoid heavy duty drills, such as hammer or SDS types. A slim-body rotary drill should weigh less than 2 kg. About Quikpoint TURBO - the significant change when compared to the previous PLUS specification is the new TURBO auger, manufactured in steel and hardened after assembly. It features a reducing diameter spiral which now extends into the delivery nozzle. Field tests have shown improved mortar delivery rate along with the ability to process stiffer and more gritty mixes. To maintain the integrity and weatherproofing of a structure, it is important that mortar joints are of sufficient depth, have no hidden voids and are adequately compressed and sealed. The Quikpoint Mortar Pointing Gun is a convenient and effective joint filling system, used by Masonry and Pointing Contractors yet suitable for less skilled operatives and competent DIYers. The Quikpoint Pointing Gun is consistently faster than trowel filling and more likely to achieve full joint penetration. It is physically less demanding than hand-held pointing guns (also known as caulking or mastic guns) which rely on hand-generated pressure and hence are prone to causing Repetitive Strain Injuries (RSI).