Facom 006105 Mechanical Grease 200g

Product Information

Repeat as needed until the stain is gone. Once the stain has been removed, clean the area with a damp cloth to remove any residue. Use a white cloth to ensure that all of the grease is gone. Look for an automotive grease with extreme pressure and high-temperature resistant additives for a stable grease that doesn’t bleed under high performance. Because many journal and thrust bearings need a greater lubricant supply, grease cannot always meet their lubrication needs. Grease is not an option for the bearings of a large steam turbine-generator in a power house that requires more than 1,000 gallons per minute of oil for cooling and lubrication. On a smaller scale, grease is also incapable of supplying the needs of sleeve bearings in either automobile engines or industrial electric motors and their associated equipment. Additionally, investing in technology to monitor bearing health is proving to be of significant value to plants around the world. Not only is a condition monitoring system going to help prevent grease from drying out, it will save you time and money by reducing unplanned downtime. This viscosity selection is confused by the common practice in grease manufacture to blend higher and lower viscosity base oils to achieve the desired viscosity. For a 110 cSt base oil at 40°C, for instance, the lighter oil used in blending might be in the 40 to 75 cSt range, the heavier at 175 to 200.

While direct correlation with field performance is often difficult, the following test procedures are useful in preliminary evaluation of potential greases. Grease and oil are not interchangeable. Grease is used when it is not practical or convenient to use oil. The lubricant choice for a specific application is determined by matching the machinery design and operating conditions with desired lubricant characteristics. Grease is generally used for: Synthetic grease is most commonly found lubricating rotating parts in machinery, such as bearings, due to its resistance to extreme environments and temperatures that may affect mineral-based lubricants.

Industrial machine maintenance, handled by professionals

Organic fatty acids and amides, lard oil, high-molecular-weight organic phosphorus and phosphoric acid esters When the machinery requires a central oil supply that can lubricate multiple parts of the machine at once Finally, lubricants can also be incorporated into industrial grease. They reduce wear and friction on surfaces without causing undesirable chemical reactions that would damage the equipment. Why use industrial grease?

The first step, no matter what method you use, is to remove as much of the grease as you can without spreading it. Pour some baking soda over the stain to absorb the grease and blot as much of the stain as possible. Once that is accomplished, you can use one of these DIY cleaning methods to clean carpet without a machine. Easy Grease Stain Removal Mix all of the ingredients into a storage container or large jug. Follow the manufacturers’ instructions that came with your carpet cleaning machine to determine the amount of cleaning solution to add to your tank. Grease Stain Removal Tips General-purpose grease (also known as GP grease) is formulated to serve various purposes, including most industrial and domestic uses. It consists of base oil with a medium viscosity index. It provides decent water and dirt protection but isn’t very long-lasting.

GreaseShield® is a Pro-Active Mechanical Grease Trap operating in real time, taking advantage of waste thermal energy present in effluent being discharged from commercial kitchens to remove emulsified FOGs, particularly saturated animal fats before they solidify. GreaseShield® removes and dewaters organic solid matter (by means of a Pre Filter or FilterShield® and optional internal Automatic Solids Removal / Transfer system) that is typically entrained in the effluent preventing anaerobic foul smelling conditions brought about by biological activity, depleting dissolved oxygen present in the effluent. Because biological degradation of organic matter in water is substantially prevented, BOD, COD, FOG and SS loadings are significantly reduced. Agricultural lubricants– agricultural machinery leads a demanding life and these greases and lubricants are optimised for keeping your farm equipment running as you need it Preferential adsorption of polar constituent on metal surface to provide protective film or neutralize corrosive acids In addition to these additives, boundary lubricants such as molybdenum disulfide (moly) or graphite may be suspended in the grease to reduce friction and wear without adverse chemical reactions to the metal surfaces during heavy loading and slow speeds. Additives can play several roles in a lubricating grease. These primarily include enhancing the existing desirable properties, suppressing the existing undesirable properties, and imparting new properties. The most common additives are oxidation and rust inhibitors, extreme pressure, antiwear, and friction-reducing agents.