Hobby CTX 3030 Metal Detector Standard Pack

Product Information

At that you still have a choice whether to use a wireless external speaker or headphones that come in the device set. However, please don’t forget that they won’t do for underwater treasure hunting. A wire that is connected to a coil is a weak point of all cheap metal detectors. CTX 3030 uses a wireless technology of sound transfer. Which means that there is no wire that interrupts the hunting process and can be easily torn off. See where you have metal detected before and where you are going by using the all-new Map screen and Minelab Navigation Tool. New GPS functions, such as Geo Trails, WayPoints, Find Points, and GeoHunts, allow you to forget your old handheld GPS at home! The precisely calibrated smart coils and detector electronics allow advanced signal analysis for more accurate detection.

It is a multi-purpose device meant for hunting at any weather conditions and over any ground type. Due to its waterproofness, the MD can be used for hunting both on the ground and under water up to 10 feet (3 meters). Fully waterproof headphones are available for those who wish to venture out into deeper water. Most spare parts are also available including batteries and chargers etc. Minelab CTX 3030 instruction manual Smartfind2 works by displaying target information on the colour screen that has been determined from the FBS2 technology.

EQUINOX 800 Technologies

With the WM 10 Wireless Module you have the choice of using the internal speaker, supplied headphones or your own favourite headphones.

High frequencies appear to be more sensitive to detect small targets and low frequencies sense deep lying targets better. FBS simultaneously sends and analyses a complete range of multi-frequencies from 1,5 kHz to 100 kHz. These include Coin, Relic, Jewellery and Beach modes which are all endlessly adjustable. Minelab’s R&D boffins have set these up after much field testing so they are good. CTX 3030 has quite complicated settings and that’s a fact. However, its manufacturers have foreseen this obstacle and that’s why the MD has 5 embedded pre-set modes. An eleven inch DD coil gives the CTX a real edge. It’s sensitive to small targets yet very deep seeking when working with the FBS lower frequencies. It also copes with difficult mineralisation easily. Minelab CTX 3030 price

The XP Deus II – The French flagship!

This means that you can take the device to the beach and to the field, get soaked wet without worrying if the device is safe.

I will walk you through setting up your machine to start your first hunt off right with unlimited help after the sale. All above mentioned brings us to the point that CTX 3030 doesn’t have any comparable alternative. All we are left with is good old-fashioned E-TRAC, though we’ll discuss the difference between these two models a bit later. When you pass the target on the edge of threshold noise and the MD can’t define the target metal, conductivity and the discriminator shows nothing as well as the target depth can’t be defined – push Pinpoint button. Metal detector is designed using FBS2 technology, that allows treasure hunting at 28 frequencies simultaneously in the range from 1,5 to 100 kHz.However, most of them are aimed at lump gold hunting. It’s easily explained by the fact that Minelab is an Australian company, so lump gold can be found quite often over the continent. It has two adjustment modes: manual and automatic one. The user manually adjusts the device to work around homogenous ground – this allows searching at ultimate depth. Many accessories are available for the CTX 3030. The CTX ships with the excellent 11 inch DD coil however a much larger 17 inch by 13 inch coil and a much smaller 6 inch coil are available.

With Target Trace and Target Separation, you can identify multiple targets simultaneously for accurate detecting results. Full Colour Display The full colour LCD clearly displays more target information than ever before and greatly enhances the CTX 3030's discrimination capabilities. FeCo Discrimination With Ferrous (Fe) and Conductivity (Co) target resolution and adjustable Tone ID Profiles, you can detect the targets you want to and ignore the rest. The Full Band Spectrum technology determines a targets iron content (Fe) and its conductivity (Co). Smart functions (Sensitivity, Noise Cancel, Audio, Ground Balance) and a customisable User button allow fast changes to your most used controls while detecting.The waterproof battery unit is quite large and it is placed on the upper section of the MD rod, so this way it acts as a counterbalance. But what has caused such an innovation? If you use ordinary batteries, not the accumulator rechargeable battery you’ll need a lot of them. Eight batteries get low during a light day without using any additional options such as GPS or other embedded functions. Now you have the freedom to metal detect without your cumbersome corded headphones being attached to your detector. With the Minelab WM 10 Wireless Module, you have the choice of using the internal speaker, supplied headphones, or your own favorite metal detector headphones. As for Minelab rivals – even their flagship models can work at only one frequency at a time, all you can do is to switch between different frequencies consistently.