Briwax 400g Wax Polish - Antique Pine

Product Information

Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property. On bare or stripped woods, Sand the surface to a smooth finish in the direction of the grain. Stain the wood if necessary. On open grained woods, you can stain and seal using a Shellac Sealer, but this is optional. Apply the Supreme wax using very fine 0000 wire wool or buffing cloth in the direction of the grain and allow soaking into the wood. Remove any excess and then once dry, buff to the desired sheen level. Several coats may be added to build further sheen and protection. This can be used on all bare interior woods or furniture. Apply Briwax using a lint free cloth or 0000 Steel Wool, thoroughly working the wax into the grain. Once dry, buff to desired finish with a clean soft cloth. Improved shine and durability can be achieved by first sealing the surface with Briwax Sanding Sealer. The Briwax finish can be maintained by further applications which will give increased hardness and shine. Larger items over 30kg can only be delivered Monday to Friday. Please allow up to two working days for these deliveries. Saturday Delivery

Preparation: The surface must be clean and dry. Briwax Original Polish can be used on previously waxed surfaces. For best results initially clean the surface with Briwax Wax Polish Remover. Larger items over 30kg can only be delivered Monday to Friday. Please allow up to two working days for these deliveries. Application: Apply to the surface with a soft lint free cloth or 0000 Briwax Steel Wool working with the grain. Once dry, buff with lint free cotton cloth to achieve the desired finish. This Antique Pine Wax Polish is ideal for cleaning, maintaining and to restore old pine furniture. It will enhance the appearance of the grain, shine and can be applied to an existing finish or on bare wood. Pine wax is used for nourishing, feeding and protecting and also helps to prevent the wood from drying out as it nourishes absorbent soft woods like Pine. It is not only used on furniture but also areas with large surfaces like interior doors, panelling and ceiling beams.

Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays. For previously finished woods (especially on antique furniture) I would recommend using a polish reviver first and then finish with Fiddes Mellow Wax Furniture Polish. We deliver to most Home Hardware Stores. Please view our store locator to find your local Home Hardware store.

What we consider to be a normal wax finish will be a slightly pigmented light brown coloured wax which will produce a warm mellow finish. Often we can show you a piece which has already been waxed which your chosen piece of furniture will look like once all done. Although pieces of old pine furniture will vary in colour and patina once waxed.Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Faster Delivery

Briwax Original is formulated with fast drying, stronger solvents which speed up drying and also increase the cleaning ability of the wax slightly. This means that it will renovate older dirtier furniture and leave you with the deep grain enriching Briwax shine. Unsealed wooden surfaces should be smooth, dry and clean.