Ewbank 280 Cascade Manual Carpet Shampooer, Large Capacity 2.5 Litre Water Tank, Easy Fill, Telescopic Handle with Trigger Release, 500 ml Shampoo Included

Product Information

The Bissell EasySweep manual sweeper can be used on area rugs, low-pile carpet, and hard floor surfaces. Its short sweeper head and low profile make it a good option for parents, pet owners, and others who frequently clean the floors under furniture. Spray cleaners are targeted treatments for spot stains, such as wine or tea spillages. Spray the product directly onto the stain, work it in, then wait for it to dry before vacuuming it up. The Vax Platinum Power Max comes with a hose and upholstery tool included so you can clean not only your carpets but also your sofas, stairs, car seats and footwells. Plug it in and you’re good to roam, just remember not to let your carpets and other surfaces get too wet! Post-treatment Next, you’ll want to take the cleaning solution and spray each stair liberally. To get a deep clean, use a scrub brush, and scrub each stair. Allow the carpet to dry, then vacuum the stairs to remove any residue.

Steam Cleaners & Sanitisers Steam Cleaners Hard floors are a pain to keep clean and shiny. But if you’re looking for a solution to the grease and stains then steam cleaners are the option for you. Steam cleaners cut through dirt and grease using high pressure steam to break it up and wipe it clean meaning no chemicals are needed. From kitchens to bathrooms, tiles and windows, and even carpets and rugs, steam cleaners will lift dirt from most surfaces in your home. Before using your steam cleaner, it’s a good idea to make sure your floors are debris-free for optimal cleaning performance. Our range of vacuum cleaners are ideal to use prior to breaking out the steam cleaner.Add water to the water level marked on the tank then add shampoo to the shampoo level for cleaning large areas. Replace the filler cap and turn 1/4 turn to the left. If spot cleaning, mix 300ml (10 oz.) water to 30 ml (1 oz.) shampoo. The Vax Platinum Power Max is designed to make cleaning your carpets as effective and efficient as possible and this guide will help you get the most out of your machine. Start by vacuuming the rug on both sides to remove any loose dirt. Next, you’ll need to test the colorfastness of the rug, by performing a spot test on the corner of the rug. If the cleaning solution doesn’t discolor the area, you can proceed with cleaning it by hand. Some carpet sweepers come bundled with additional accessories to help clean a variety of messes. One common accessory, a squeegee attachment, affixes to the sweeper to clean walls, floors, and even bathtubs. Other models have a brush to clean the sweeper’s rotating bristles to maintain the bristles and prevent hair and debris buildup. For best results the shampoo should be mixed: 10 part water to 1 part shampoo i.e. 10 cups of water to 1 cup of shampoo, or using the filling marks on the rear of tank produces the same results (10 to 1 mix).

Unlike bulky, heavy vacuums, carpet sweepers generally weigh less than 5 pounds because they don’t have motors. Some models weigh as little as 2 pounds.Mix the ingredients in a small bowl. Dip a sponge or brush into the solution and begin to scrub the rug. Allow the mixture to sit on the rug for several minutes.

We also rate it more highly than many others for pet stains, leaving carpets feeling super-soft after treatment. Vax Ultra+ works faster than most cleaners, even on large surface areas, although for really stubborn stains you might want to pre-treat the area by rubbing in a little extra shampoo. When all is done, grab yourself a job-well-done cuppa and relax! You have arrived at carpet perfection. Squeezing the trigger will release the valve in the head of the unit allowing the shampoo and water mixture to be applied to the foam roller. Using short overlapping strokes the mixture will be applied to the carpet or rug – DO NOT OVERWET the cleaning area. Releasing the trigger will stop the flow of shampoo/water mixture, although the roller will remain wet for a time afterwards. After use let the carpet or rug dry completely, then vacuum or use your carpet sweeper to remove the deposits lifted by the foam shampoo.

Just sprinkle a generous amount of baking soda over your floor, or directly on a stain. It works similarly to other homemade floor cleanerand DIY carpet stain remover recipes.