3 Channel 5A DMX512 Controlled Relay Switch Kit DIY Converter DMX Dimmer Relay

Product Information

Please note that this extended warranty is currently only available on products sold within the UK, EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided. You should get an instant answer on whether your application has been successful, though in some rare cases Klarna or V12 may need to look at the application in more detail.

You should use a separate show WiFi network, on a dedicated WiFi AP/Router. Don’t just add your light controllers to your home WiFi- you WILL have issues. I also recommend you set it up as a “hidden” network- look for a “Don’t Broadcast SSID” or similar option on your AP/Router.

Note- an Amp is an Amp no matter what the voltage! A blade fuse and fuse holder are just fine in this case. UPDATE: void rotaryMenu() { //This handles the bulk of the menu functions without needing to install/include/compile a menu library Once you have finished editing things, you are ready to upload your Sketch to the D1 Mini. Plug it into your computer using a Micro-USB cable. You might see a brief flash of a blue LED next to the WiFi antenna, but otherwise not much will happen.

int output_1 = 5; // names the ESP8266 GPIO output pin we are using (5 is D1 !!!), don't change this for Relay Shield.Collection and delivery costs are included for the first 2 years in the event of an item becoming faulty That’s it- now you can go to Tools -> Board -> Boards Manager, and install the “ESP8266” boards. When done, you can select: If you have plenty of DMX ports, the hard-wired ColorSource Relay DMX is perfect to fine-tune your power distribution.

pinMode(pinA, INPUT_PULLUP); // set pinA as an input, pulled HIGH to the logic voltage (5V or 3.3V for most cases) The ColorSource Relay Multiverse Receiver gives you wireless capabilities. It works with the first generation of ColorSource equipment, or with the new Multiverse technology.

volatile int encoderPos = 0; //this variable stores our current value of encoder position. Change to int or uin16_t instead of byte if you want to record a larger range than 0-255