Paslode 013060 Impulse Cleaning Kit for the Paslode Impulse guns

Product Information

So your Paslode’s now clean – hopefully it seems refreshed. But is it firing like it should? As well as regular cleaning, your nail gun also needs new spare parts fitted every now and then. The o-rings, battery pads, filter, etc. get worn out and need replaced. Here are some great options if you’re looking for an equally powerful but cheaper Paslode degreaser cleaner alternative.. Paslode degreaser cleaner alternative – 2 recommended options that work as well

Records the default button state of the corresponding category & the status of CCPA. It works only in coordination with the primary cookie.Now proceed to spray (and wipe the deposits) the main cylinder along with the piston driver assembly. Spray the cylinder head assembly liberally and get rid of the gunk with lint-free cloth/ compressed air. If you don’t want to splash out on the pricey Paslode nail gun cleaner, try these Paslode degreaser cleaner alternatives. 1: Brake cleaner Next, disconnect leads from your fan motor and the spark plug to reach the tool’s cylinder head assembly. These products are strong enough to blast away oil, dirt, carbon deposits, and more from overly sensitive electrical equipment including pneumatic and cordless nail guns.

Using a nailer with loose screws can cause damage to both you and the tool. Test your nail gun after cleaning. Regular cleaning (depending on use) is essential to keep your Paslode nail gun firing and running smoothly. It’s specially formulated to withstand the high temperatures generated by Paslode nail guns. Other lubricants can cause rapid build-up of combustion residue which will affect your nailer’s performance and require more frequent cleaning. It can also lead to premature parts failure and, in the worst case, an unrepairable nail gun. Use official Paslode degreaser cleaner.

We Hope Our Paslode Cleaning Guide Has Helped

This prevents you from spreading dirt or scratching the internal parts of your nail gun. Make sure you properly tighten all screws when reassembling your nail gun.

Any of the two substitutes we have explained here will do the job and can be a good way of saving your hard-earned money. This video shows you how to clean a Paslode framing nailer (IM360Ci, 360Xi, IM350) or positive placement nailer (PPN35Ci, PPNXi): Don’t worry if a small amount of smoke comes out from your nailer – this is normal. Your Paslode Also Needs Regular Servicing Your last step is re-oiling -use the right Paslode gun oil (or a good paslode oil alternative as well) for lubing- be sure to place a couple of drops around the tool’s cylinder wall. Now spray the filter and wipe it clean either with a lint free cloth or by blowing through with air.Is your nailer not firing properly? See our handy Paslode Troubleshooting Guide to help you diagnose the problem. That said, avoid using a brake pad cleaner or any other unofficial cleaner if you’re still within the warranty period -it will void it.