276°
Posted 20 hours ago

Knightsbridge SN8300 Standard Pull Cord Switch 2 Way 10A, 230 V, White-2W

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Step 3 – Spray the switch area with the a little maintenance spray or WD40 and attempt to loosen the spring to make the switch work properly. Hold it with one hand and pull the cord with the other Pull cord switches can be used to control an electrical circuit. Popular uses include bathroom lights, electric showers or fans. Pull cord switches are also used for disabled toilet alarms.

To save a little time and fatigue, loosen the terminal screws on the new switch also. Step 4 – Connect New SwitchUndo the screws on your new switch where the wires will go – feed the main cable through the base and screw the base into the ceiling. Now you can connect the wires – just make sure you tighten the screws properly and if the earth wire is present that you put a sleeve on it and connect it to its place on the base plate. As you can see in this picture whoever installed it they never bothered connecting the earth to its place for some reason. The neutral wire should also have a brown sheath or brown tape wrapped around it to indicate that it’s the switched live, but this will depend on the wiring setup. As long as you wire it up the same as the old switch, all will be well.

Step 3 – Using some maintenance spray such as WD40, apply the lubricant to the inside of the switch, where the wires are connected, especially in around the pull cord section A pull cord switch, sometimes called a light pull, is an electrical switch which features a cord or string to control it. These switches are commonly found on the ceiling of bathrooms or other areas where water is present. Why use a pull cord switch? Adding additional lighting, light fittings and switches, to an existing circuit – As long as not in a kitchen or bathroom For the first part of this guide we will work through replacing a standard 6 amp pull cord light switch. From step 6 we will explain changing a 45 amp isolation switch. Step 1 – Isolate the Switch and Circuit All this is conditional upon the use of suitable cable and fittings for the application, that the circuit protective measures are unaffected and suitable for protecting the new circuit and that all work complies with all other appropriate regulations.

Pull switch alarms often have a red cord or handle to draw attention. They are used in disabled toilets, for example, if someone needs to raise the alarm for assistance. Therefore pull switch alarms need to stand out in case of emergency. 1-Way vs. 2-Way Pull Cord Switches Pull cord switches are very handy items as they can be used in a variety of situations such as bathrooms and the similar where a standard tumble-type switch cannot be used. Some pull switches feature a light which indicates when the switch is on. These are ideal for applications like electric showers as it is not obvious when they are switched on or off otherwise. Types of Pull Switch Step 1 – Before doing anything, turn off the circuit you are working on in the consumer unit or fuse box by turning off the MCB or pulling out the fuse. Most of these types of switch include a neon indicator, which will glow red or orange. If you have switched off the supply correctly the indicator will not be lit.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment