Liquid Chlorine Pool Shock - Commercial Grade 12.5% Concentrated Strength - 1 Gallon

Product Information

Once you’ve measured and, if necessary, diluted the right amount of chemical, add it gradually to the pool. With over 20 years of experience in construction, Rob specializes in energy-efficient and drought-tolerant landscaping. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. For instance, suppose you have a 33,760 gallons (127,800 L) pool, your current chlorine level is around 0 ppm, and your product directs you to add 1 tablet per 5,000 gallons (19,000 L) to increase chlorine levels by 1 ppm. Test your pool water daily if it gets regular use, and maintain a free available chlorine level between 1 and 3 ppm.

If not, purchase liquid or granulated cyuranic acid, dilute it according to the package’s instructions, then add it to the pool.To chlorinate a pool, first you’ll need to calculate the volume of the pool if you don’t already know it. Simple floaters are inexpensive, while skimmers that clean debris and dispense chemicals can cost hundreds of dollars (U. a landscaping, hardscaping, ecoscaping, and swimming pool design company in Los Angeles, California. If your chlorine is labeled “stabilized,” “trichlor,” or “dichlor,” it already contains cyuranic acid, and there’s no need to take any further action.

The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water. X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. Shock treatments bring free available chlorine levels to 8 to 10 ppm, which is outside of the safe range for swimming. They’re easier to use, last longer, and are gentler on pool liners than liquid options, which are best used as shock treatments.

In addition to using tablets, you should also sanitize your pool with a liquid or granular chlorine shock treatment every 1 to 2 weeks. Always test your chlorine levels after amending the pool water before you allow anyone to go swimming. Additionally, shock it after pool parties and if it’s been contaminated, such as after a bathroom-related accident. To be sure, check the instructions for the amount needed to produce a 1 ppm change in chlorine levels. For a circular pool, measure the diameter, divide it in half to find the radius, then use the formula πr

Chlorine helps keep a pool clean, and managing chlorine levels is an important aspect of owning a pool. Chlorine tablets are the best option for maintaining a normal level of 2 to 3 parts per million (ppm). Instead, it’s best to use a floating chlorine feeder, chlorinating skimmer, or other automatic dispensing device.Bear in mind a free available chlorine level over 10 ppm may burn the test strip and yield a false reading of 0 ppm. Read your product’s instructions; the label will let you know how much to add based on your pool’s volume to reach the target chlorine level in ppm. Put on a pair of protective goggles and thick gloves before working with chlorine and other pool chemicals.

For a quick estimate, measure your pool’s length and width, find the average depth, then multiply length by width by the average depth. Unless your pool’s chlorine level is below 1 ppm or above 5 ppm, it’s fine to go swimming while the tablets dissolve. Be sure to wear protective gear when diluting or applying chlorine shock treatments and any other pool chemicals. If your pool is circular, measure the diameter, divide that value by 2 to find the radius, then use the formula πr 2h, where r is the radius and h is the average depth.Slowly mix the solution until a liquid product is evenly dispersed or a granular product is fully dissolved. If you’re adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. Free available chlorine is active and kills germs, while combined chlorine is the amount that’s been used up killing germs.