ELAGO Nest Classical Wall Plate - White

Product Information

The Nest Learning Thermostat is designed to work even if your home doesn't have a commonCwire, but installing a newCwire may be required in rare cases.

Install a Nest thermostat trim plate - Google Nest Help

TheNest Thermostat E works with 85% of 24 V heating and cooling systems, including gas, electric, forced air, heat pump, radiant, oil, hot water, solar and geothermal. Thread the power cable that came with your Nest Stand through the hole so that the small end of the cable comes out in the front. Important:The stand is different for the 2nd and 3rd gen Nest Learning Thermostats, and they are not interchangeable. To make sure you get the right stand for your thermostat, see the differences below. The Nest app will guide you through wiring for the Nest Thermostat E. Below is the wiring diagram for 3rd-gen Nest Learning Thermostats. Nest Thermostat works with most 24 V heating and cooling systems, including furnaces, air conditioners, boilers and heat pumps with either forced-air or radiant delivery.We recommend professional installation for a 3rd- or 2nd-gen Nest Learning Thermostat, but you should be able to install a Nest Thermostat E yourself, depending on your system. Important: Because the Nest Learning Thermostat works best on a stand when it stays in one place, you shouldn’t move it after you’ve chosen a good spot. Features like automatically switching to Eco Temperature depends on your thermostat being able to get consistent temperature and activity readings from the same spot in your home. If you have an existing wired thermostat installed on your wall, you should be able to install a Nest Learning Thermostat in the same place. However, to ensure that your thermostat runs smoothly, you should make sure that you do the following: Once you’ve gotten used to having a Nest thermostat, you may not want to return to the more conventional options. You’ll want to keep it even if you’re moving or renovating your home. The good news is that you can reuse your Nest thermostat as long as you remove it properly first.

Wall Plate Cover Compatible with Nest Learning elago Aluminum Wall Plate Cover Compatible with Nest Learning

Use a screwdriver to connect the thermostat base to the trim plate. High torque power drills can over-tighten the screws and damage the thermostat base. If you need to use a drill, use a low torque setting at slow speed. Nest screws are self-tapping, so there’s no need to drill into soft materials like drywall or plaster. If you need to drill into harder materials like wood, use a 3/32 or 2.5 mm drill bit. Tip: Sometimes, pets in your home can be detected by your thermostat and prevent your home from switching to Eco Temperature when everyone else is away. You’ll need to either manually switch to Eco Temperature, or keep your pet away from the room that your thermostat is in.The next thing you’ll have to do will depend on what you have in mind for the Nest thermostat. Homeowners who are looking to just reuse their Nest thermostat in the future can store it until the time to reinstall. For the homeowners who are looking to replace and re-gift their old Nest thermostat, account removal will be necessary. Don’t worry because removing an old Nest thermostat from your account is as easy as resetting it.