10 x Mini Micro JST 2.0 PH 3 Pin Male/Male with 150 mm Cable and Female

Product Information

The connector's width is around a half centimeter in width and came with 28 AWG wires connected to it (if that helps at all). Furthermore, a serrated, oversized square post is pressure-fit into each square hole to completely protect the post against heat and to prevent flux from entering during dip soldering. I can't find the Eagle library parts for the JST 3-pin connector or the 4-pin and 5-pin connectors (which come with the wire assembly) in the SparkFun Eagle library. Housing material is polyamide 6 and natural colour • Flammability rating complies to UL94 V-0 • Housing featured with locking • Suitable for wire to wire connector syste. Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components.

At the same time, the insulation layer of the heat dissipation wire is not easy to fall off, which can well protect the JST plug connector.You can just use a small pair of wire cutters to bend the terminal arms onto your wire, or you can solder the wire onto the terminal.

Connectors are easier for professional division of labor, parts replacement, troubleshooting and quick assembly.New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . This link ensures that all data passed between the web server and browser remains private and integral. This connector mates with our 3-pin jumper wire, and may be useful for interfacing with the popular Sharp infrared proximity sensors or our serial LCDs. We have switched to packaging that is either fully made from, or partially made from, recycled materials, which is helping to reduce our impact, and carbon footprint, on the environment. Neither solution is recommended, but they do work fine for non-critical applications where you only need to make up a few assemblies.

With the development of electronic products, a wide range of connectors are present in electronic equipment. The 3 pin sockets are increasingly used on small 2S LiPo batteries for dual use as power and balance connector. However, because products are regularly improved or purchased from different suppliers, the product information may occasionally change without notice. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. This SM series wire to wire white Connector is made of tin plated phosphor bronze contact and are individually surrounded by housing walls having secured locking mechanism, . The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors. The four-sided, box-shaped shroud prevents the receptacle from being misinserted or pried during insertion and removal.

The protected, folded beam contact in this connector provides high contact pressure with an over-stress stop feature. An adapter lead to allow single cell LiPo with 'UM' battery connector to be used on receivers with a JST-PH socket - e.This connector was wired to the scroll encoder of a mouse I had and currently am trying to identify it. The 2 pin connector is used on 1S LiPo where the discharge current would exceed the safe limit for a 'UM' connector. TAKE CARE: the convention for wiring these connectors has the positive and negative wires on opposite sides when comparing the 2 pin and 3 pin - see connector wiring for details.