About this deal
The pliers have curved outer edges so you can reinstall a link, but this is kind of superfluous as, if your link is still new, the amount of force needed to snap it into place will require that you resort to the tried and tested method of putting the link at the top of the chain run between cassette and chainring, and pushing down on the pedals to tighten it.
There are various motorcycle chain tools available to help you work on your own bike chain, ranging from DIY handheld devices to heavier-duty versions aimed more at professionals. We’ve put together a list of some of the best and most useful whatever your level. With the in-built storage space, you can carry two additional master links. Magnetised for simple closure and remarkably lean, you’ll be glad to have these out on the trails or in the wilds. Pliers are a useful hand tool, and they come in many different varieties. Each kind of pliers is designed to do specific jobs, though all pliers use a similar design. Pliers consist of two metal levers that are joined at a pivot point, or fulcrum. On the shorter side of the fulcrum are the jaws, which also include pipe grips and a cutting tool. On the longer side of the fulcrum are handles. As a result of the position of the fulcrum, users are able to amplify their force and focus it on the specific object being manipulated by the jaws of the device. Pliers are especially handy for holding, gripping, prying apart and cutting objects. Finance is subject to application, financial circumstances and borrowing history. Performance Cycling Limited FRN: 720557 trading as Tredz are authorised and regulated by the Financial Conduct Authority. We are a credit broker not a lender – credit is subject to status and affordability and is provided by Mitsubishi HC Capital UK PLC. Terms & Conditions Apply.The vast majority of motorcycles use a chain to carry drive from the output of the gearbox to the rear wheel. Sure, there are shaft-driven bikes – notably BMWs – as well as belt-driven examples but the humble chain is by far the easiest and most reliable when it comes to moving torque to the rear wheel. Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
Keep in mind that some bike link pliers help you open the links, some help close the links and some do both jobs. If you don’t want to get two separate tools, look for two-in-one bike link pliers that will help you both open and close the links. As shown below, I unseated this tire and levered it out to test. No real issues to speak of, but if you look closely at the third photo in the triple series, you will notice a tiny bit of anodizing rubbed off in a very small 1cm section. A non-issue for me, but if you are really concerned about it, there’s nothing stopping you from filing the lever spoon to a completely rounded surface. In addition to the handles being padded, you may want to consider getting pliers that have no-slip grips. This helps to ensure that your hands don’t come off the handles while you’re exerting force. It’s a good way to keep yourself safe and make sure your bike frame and chain don’t get any dents.
From The Manufacturer
Wolf Tooth is based in Minnesota, USA, and makes pretty much everything locally to exacting specifications. This shows in the fit and finish of the 8-Bit Pliers – they feel every bit a premium product. With bike design and functions under constant evolution, it's hardly surprising that new tools are required to suit new needs. The almost infinite variability in requirement and rider use case makes for fruitful ground to grow a crop of unique tools, and the 8-Bit Pliers epitomise this trend. Bike link pliers, which are sometimes called master link pliers, are used when you need to remove, replace or repair the chain on a bicycle. Most bike chains include a master link, which makes it easy to remove the chain. The jaws of the pliers are shaped specifically to fit into the links of the chain. You need to open up the pliers and insert the jaws on either side of the master link. Once the pliers are engaged with the link, you can squeeze the handles to break the link. Bike link pliers will also help you reassemble the chain once you’re done working with it. Set into the 8mm hex head is a 4mm hex hole, which the six supplied bits slot into. This is smaller than standard tool bits, which are 1/4in (6.3mm) drives, so you can't mix and match with other 1/4in bits if you want a size not provided, like a T15, T20 or T30 bit. However, 4mm is a standard drive size for low-torque tool bits used in fine engineering applications, easily found from brands like Wiha under its 'Micro Bit' label if you shop around. There are several types of chain depending on the design of the links themselves and there are also different types of links that are designed to allow the chain to be replaced.
![Asda](http://magento-forum.co.uk/777/templates/hotukdeals/res/23958_2.jpg)