FlashPad 2.0-Blue Model

Product Information

Use the arrow keys to move down four times, select the menu as shown in the figure, and use the “Space/Enter” key to select and enter the next menu. The attached volume appears to be invalid.” This will appear if you connect a flash drive that does not use a readable format. Start compiling the firmware by entering the following commands (input one at a time): make clean make If your device is a USB drive, you can find your files in the Files app. If files are zipped, just press the zip folder and photos will be extracted automatically to a separate folder.

After the selection is successful, you should return to the menu as shown in the figure. At this time, use the arrow keys to move down, and use the “Space/Enter” key to select and enter the next menu. If your device is a camera, the Photos app will automatically launch and show the Import tab so you can browse the pictures/videos on your device. You can tap Import All to import your content, or tap specific items, then tap Import to transfer them to your iPad. If you'd prefer not to use Photos you can also find your photos and videos in the Files app. [2] X Research source . Use the arrow keys to move up once, select the menu as shown in the figure, and then use the “Space/Enter” key to confirm the selection and enable the “extra low-level” function. Connect the printer to the “Port1” USB port of Speeder Pad with a USB cable. Please keep the connection during the firmware upgrade.

Reviews

We provide some compiled firmware, available from here: https://github.com/Flsun3d/Flsun_Speeder_Pad/tree/main/firmware When the following screen appears, use the arrow keys to move down four times, select the menu as shown in the figure, and then use the “Space/Enter” key to confirm. Create a new folder and rename the folder to “Printer Model + Size + Leveling Method”, For example, Flsun-Q5, the size is 200200200, and the leveling method is Auto level, then the folder name is “Flsun-Q5 pro 200200200 Autolevel”. Use the arrow keys to move down twice, select the menu as shown in the figure, and use the “Space/Enter” key to select and enter the next menu. If your motherboard has no BootLoader and is not an SD card upgrade, please use the following method to upload the firmware.

Use the arrow keys to move down twice, select “28Kib bootloader” and then use the “Space/Enter” key to confirm the selection. We provide compiled firmware, but because there are many types of printers and motherboards, if your printer is not in the preset configuration, you can try to configure the firmware yourself to make Speeder Pad connect to your printer. For common microcontrollers, the firmware can be flashed using something like the following (input one at a time): Use the arrow keys to move down four times to the “(on USART3 PB11/PB10)” menu as shown in the figure, and use the “Space/Enter” key to confirm the selection.You can use the “direction key” to move up and down, use the “Space/Enter” key to select and confirm, and use the “ESC” key to return or exit.