Joined in 2023 
82 
63 About this deal
You will also see in the image above that it states: “Selected Display is not validated as G-SYNC Compatible.” This means Nvidia hasn’t specifically tested and validated the display. On our RTX 3090, the experience was very similar to what we described with FreeSync. Surprisingly, the floor of operation for VRR was lowered to 38Hz – below that an LFC-like frame to refresh multiplication was used to keep tearing and stuttering at bay. Whilst there was momentary stuttering when this boundary was crossed, it was masked very effectively by the ‘low frame rate judder’ that is experienced at such a low frame rate anyway.
The video below shows the monitor in action. The camera, processing done and your own screen all affect the output – so it doesn’t accurately represent what you’d see when viewing the monitor in person. It still provides useful visual demonstrations and explanations which help reinforce some of the key points raised in the written piece. For simplicity we’ll just focus on a few titles in this section; Battlefield V and Shadow of the Tomb Raider. These are games we’ve tested on a broad range of monitors under HDR and we know they’re a good test for monitor HDR capability. The experience described here is largely dictated and limited by the screen itself. Although our testing here is focused on HDR PC gaming using DisplayPort, we made similar observations when viewing HDR video content on the Netflix app. There are some additional points to bear in mind if you wish to view such content. We also made observations using HDMI, which would be used when viewing HDR content on an HDR compatible games console for example, and things were very similar. Testing on both our Nvidia and AMD GPUs showed that the HDR implementation was similar in both cases, too. The monitor includes three ‘HDR Mode’ settings; ‘Game HDRi’, ‘Cinema HDRi’ and ‘Display HDR’. As noted earlier, these settings act as ‘emulation modes’ (quite a misnomer) under SDR but act as distinct HDR settings when an HDR signal is detected. ‘Game HDRi’ and ‘Cinema HDRi’ incorporate the light sensor, as used for ‘Brightness Intelligence +’ (B.I. +) under SDR. This adjusts the image based on the content being displayed as well as ambient lighting. As we covered earlier, it will adjust brightness such that unless the room is very bright it essentially acts as a limiter. That brings down brightness to distinctly ‘un HDR-like’ levels, whilst further adjustments are made to colour temperature gamma and other elements. There's no rotation available, so you can't use the monitor in a vertical position. The display is best employed as a primary gaming screen, so this isn't a huge deal. And as mentioned, it would be nice to have a higher possible height adjustment to avoid having to use a riser. Our suggestions regarding use of VSync also apply, but you’re using Nvidia Control Panel rather than AMD Radeon Software to control this. The setting is found in ‘Manage 3D settings’ under ‘Vertical sync’, where the final option (‘Fast’) is equivalent to AMD’s ‘Enhanced Sync’ setting. You’ll also notice ‘G-SYNC Compatible’ listed under ‘Monitor Technology’ in this section, as shown below. Make sure this is selected (it should be if you’ve set everything up correctly in ‘Set up G-SYNC’).An sRGB emulation setting, restricting colour gamut so it runs even closer to sRGB. Brightness can be adjusted, other settings including gamma and colour channels can’t. Things appear somewhat more muted, actually a bit undersaturated in places with a slightly weak green channel. Note: The EX2710S is very similar to the base model reviewed here with a boost in maximum refresh rate from 144Hz to 165Hz. As factory defaults but somewhat warmer look, a touch brighter and with a bit of a green bias. All colour channels are in their neutral position (‘100’), maximising contrast. The monitor includes a range of easily accessible Low Blue Light (LBL) settings, which can be set between ‘0’ (disabled) and ‘20’ (strongest effect). The stronger settings were particularly effective at reducing blue light output from the monitor, especially when coupled with reduced brightness. They significantly reduced the blue colour channel and hence blue light output from the monitor. They also strengthen the red channel whilst reducing the green channel somewhat, providing a better visual balance compared to some LBL settings which can introduce a green or yellow tint. This has an effect on contrast as we explore shortly. The image appeared warmer using these settings, which we found our eyes adjusted to quite readily over time – more so than when additional imbalances such as a green tint are introduced. Reducing blue light exposure is particularly important in the hours leading up to sleep as blue light is stimulating to the body and affects sleep hormones. It increases alertness and makes it more difficult to ‘shut off’. We used the strongest setting of ‘20’ over our ‘Test Settings’ for our own viewing comfort in the evenings. But not for any specific testing beyond that involving the setting itself.
The ‘S’ variant also includes a ‘Sharpness’ control as illustrated in the manual (PDF), whereas the original variant shown in the video doesn’t include this. If you’re intending to use the monitor with the PS5 or Xbox Series X/S, be aware that a small settings tweak may be required to ensure 120Hz is selectable for the Full HD resolution. Details can be found in this article. It’s important to note that strobe crosstalk varies at different areas of the screen. Not all areas refresh simultaneously, so its appearance can differ depending on how high up or low down on the screen movement is being observed. The images below show pursuit photographs running from the top to bottom regions of the screen, with the screen set to 144Hz and ‘AMA = 2’ with Blur Reduction active. Strobe crosstalk variation at different points was also observed at 120Hz and 100Hz and with different AMA settings, but the relative variability in strobe crosstalk at different sections of the screen remained the same. So we didn’t feel it was worthwhile documenting these observations. AMD's FreeSync Premium is standard, but NVIDIA G-Sync compatibility means the display will work with any of the best graphics cards to prevent screen tearing. A 1ms MPRT and 2ms GtG response time is low enough for competitive gamers out there who rely on fast-twitch movements to succeed. As for color, I measured in the display's custom mode 96% sRGB, 77% AdobeRGB, and 80% DCI-P3. A look we like to describe as ‘rich and natural’, with a somewhat cool tint. A touch of extra depth and saturation for sRGB content due to the gamma handling and gamut, nothing dramatic.Overall we feel this is a well-rounded monitor, for those who like a good mixture of responsiveness and colour quality. And who prefer things to look rich and natural with a touch of extra saturation and vibrancy, rather than things being taken to the extreme in that respect. The screen size and resolution combination won’t be for everyone, although we’d caution people that we’ve seen a lot of exaggerated claims in that respect as well. “Pixels the size of golf balls” or “huge pixels” is not an appropriate description for what are still very small pixels on the screen. As with many things it’s all very subjective. But if you like the sound of this model but prefer a tighter pixel density and can live with a smaller screen. The we’d also recommend considering the 24.5” EX2510.
Great Deal 
New Comment