CleverSpa 8106 Water Filter Pack Compatible for Use with All Hot Tubs, Easy-to-Install and Simple-to-Maintain, 17.1 cm x 10 cm x 9.8 cm (White and Light Blue)

Product Information

You can also put the filter in a pillowcase, then let it spin in a washing machine with water and soap. Cleverspa, and other similar products, should be used safely. These are some things to consider while you enjoy the product. Do Not Overheat The Water Make a solution of a filter cleaner and water in a basin, then put the filter in it. Cleaning the filter with a pressure hose is not recommendable.

Since Cleverspa uses electricity, its usage will affect your electricity bill. The actual cost of using the product will depend on the duration of use. Observe the performance of the Cleverspa heater. Is it not heating the water? Or is the water overheating? Such temperature issues may be due to dirty or clogged filters. The quantity of water a Cleverspa heater can hold depends on its size. For instance, a six-person heater can hold up to a thousand liters, while some smaller units can hold around 800 liters. Fold the Cleverspa and push it to release the remaining air. Make sure not to cover the control panel between the folds. Find the dotted circle near the air outlet, then tap it a few times to release the air. If there's still no air passing through, try the next step.After using the unit, ensure you disassemble and store it properly. To do this, follow the steps below: The pump on your Cleverspa makes the air jets work and inflates its wall. Bubbles in the water indicate that the air jets are working fine. Are you thinking about resetting your Cleverspa heater? How and why should you reset it? We've done the research and are here to answer your questions.

Clean the area where you want to set up the Cleverspa heater. Ensure that there are no sharp objects that may damage the unit.

Why Is My Cleverspa Heater Not Working?

Suppose you're using the unit outside; ensure the wires are away from the water. You can also keep your pets away, especially those with sharp nails that may scratch the heater. Disassemble Properly Consider setting the heater's temperature between 34-38 degrees Celsius or 93-100 degrees Fahrenheit to minimize the risk of burning yourself. Use A Cover

Although the Cleverspa heater can display "FC" on the screen, which means " filter change," you don't need to wait for the code to appear. You can clean or replace the filter to enable better temperature regulation. Follow these stepsto accomplish the task. Press the TEMPERATURE button to select your desired temperature. Press it again to confirm the selection. Unscrew the filter, then twist its cap to remove it. If you opt to replace the filter, skip to step 6. Turn on the Cleverspa heater to see if the error code still appears. If so, you might need to consult a technician or the manufacturer to fix the issue.One way to resolve an error is by resetting the unit. However, if the issue persists, you might need to reset the heater more than once.