276°
Posted 20 hours ago

PC-Products 087770 PC-7 Heavy Duty Permanent Repair Paste Epoxy, 1/2 Pound, Dark Grey

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Finish the job. Smooth the epoxy putty out with damp rag before it hardens. Manufacturer’s instructions will indicate how long you need to wait before sanding, drilling or painting the epoxy putty. Eyeballing tip: Make a circular mound (like half a golf ball) of part A. Alongside but not touching, make a

The adhesive can withstand high mechanical stresses, extreme temperatures and chemical resistance, making it ideal for the automotive industry. PC-7® is the original tough job epoxy! This paste epoxy was originally formulated more than 60 years ago for the maximum in bonding power. Professionals to the do-it-yourselfers select PC-7® because of its exceptional adhesion to metals, ceramics, masonry and many plastics.

Evo-Stik Hard & Fast Metal Epoxy Putty

PC-Woody® should be mixed in equal parts, one part A (white) to one part B (brown). Off-ratio measurement is the main cause of soft cured PC-Woody®. The amounts should be as close to equal as possible, but a slight excess of part A is preferable to an excess of part B. Excess of part B (the hardener) will not accelerate curing and may prevent it from hardening. We generally recommend eyeballing the amounts but if more precise measurements are desired, based on an average net weight it is 10.6 parts A to 10 parts B. to judge the % of parts. If the repair is outside and the weather is cool we’d recommend placing the tubs fittings. Measure equal volumes of part A and part B, then measure an additional half portion of part B. rounded mound of the same circumference, adding or taking away until the height matches the mound of Prepare your surface as best you can to ensure the best possible bond with PC-7®. Remove contaminants such as dust, dirt, oil and grime with a solvent such as methylated spirit, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Mild detergent solution in water is also good for removing contaminants. Use a clean paper towel or rag for wiping. Do not use white spirit or paint thinner for removing contaminants.

Prepare the epoxy putty. Mix up a sufficient amount of epoxy putty according to the manufacturer’s instructions. Eyeballing tip: Make a circular mound (like half a golf ball) of part A. Alongside but not touching, make a rounded mound of the same circumference, adding or taking away until the height matches the mound of part A. Make space and set out your materials. Surfaces must be grease, dust and oil-free. If the surfaces you want to apply the epoxy putty to are smooth, then you should lightly sand them as this will improve the adhesion.more precise measurements are desired, based on an average net weight it is 116 grams part A to 100 require precisely a 1:1 mix ratio. Plus or minus 25% of part A or B does not affect the performance. Adding To mix PC-Woody® you’ll need a spatula, putty knife or similar (something stiff) and probably a piece of scrap wood, cardboard or similar to mix on. We don’t recommend mixing in a cup or container as it can be hard to judge the % of parts and will accelerate the reaction. PC-Woody® that is spread out will have a longer worktime than in a container. If the repair is outside and the weather is cool we’d recommend placing the tubs somewhere warm to reduce the viscosity. cloth/kitchen roll in between! This will ensure that the rest of the tubs remain good and uncured for future

It has a variety of capabilities being versatile for the craftsman as well for most industrial applications. To mix PC-7® you’ll need a spatula, putty knife or similar (something stiff) and probably a piece of scrapIf purchasing a larger size you will have two tubs. We generally recommend eyeballing the amounts but if wood, cardboard or similar to mix on. We don’t recommend mixing in a cup or container as it can be hard

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment