COMFAST WiFi Booster WiFi Repeater (300Mbps, White)

Product Information

It stands for Wi-Fi Protected Setup and is a shortcut for setting up devices without requiring the need for network name or passwords. However, it adds ‘EXT’ on the end - 0606 Hyperoptic 1GB Fibre 5G_EXT - so that you can still tell the range extender’s new network apart from the router’s normal network. If there is an option, set it to repeater mode so it is just repeating and amplifying the Wi-Fi signal from the access point. In most cases, a wifi extender will bring a good connection to all the places you want to use a wireless device at home or the office. Push the WPS button on the wifi extender and then do the same on your wifi router, after doing this, you should see a solid green light on your extender.

This is usually “WIFI_EXTENDER” or something similar; check the instructions if it asks for a password. Check that the Comfast extender is within range of your router and is not located in a signal-poor location. Although Ethernet cables are made to last and can handle a little bit of wear and tear, they can become damaged. Once the setup is complete you should mount the access point on the highest point that you can, with as few obstructions in between the access point and the location of the WiFi device as possible.After you launch your web browser, type the IP address of the wifi extender into the address field (or address bar).

Move your extender to its preferred location which is ideally halfway between your router and the area with poor Wi-Fi signal. However, you do still need to select the Range Extender network each time you go back to that room with the dodgy Wi-Fi.If you can connect to the extender’s Wi-Fi network with its default SSID and password, you can follow the same steps as above with your phone’s browser.

Slide the port cover off the bottom end of the WiFi access point, then connect one end of the long ethernet lead to the port on the POE injector marked 'POE' and connect that to the port marked 'WAN' on the WiFi access point. WiFi signal, which allows our Green Feathers cameras to easily connect to it, as well as any other WiFi devices that have compatibility issues with 5GHz devices. Maybe you have a pet who has the habit of chewing on cords or some cables got pinched beneath heavy furniture.This will show a list of nearby WiFi networks which you will want to select the Comfast one which shows up. Modern routers and range extenders now have a WPS button (‘Wi-Fi Protected Set-up’) that creates a two-minute window in which the two devices can connect to each other without needing your Wi-Fi password. Once you’re logged into the repeater interface, it should start a wizard to guide you through connecting to your local network step-by-step. Even if you tried out an analytics app and you found the right place to setup your wifi extender, issues may occur.