K Rend Alkali Resistant Reinforcing Mesh

Product Information

It is thought that a well-fitted K Rend render can last for quite a while - its materials come with a British Board of Agrément (BBA) 30-year guarantee. You will also not have to paint it as much as you would a traditional render, but you can certainly paint it if you want to. It is recommended to use K Rend paint to get the job done and avoid causing any issues with the k render system. Resistant to water Mesh - Mesh is used so it can be ingrained within the base coat. Estimated cost: 70p per m2. K Rend products available for UK-wide delivery No, it simply needs a gentle wash down to freshen the appearance. If you use a power hose, make sure it is on a gentle fan setting. What does it mean ‘Low Maintenance’? K Rend are part of Kilwaughter Minerals and are the largest UK independent silicone render manufacturer with over 30 year’s experience in the construction industry. What is K Rend? K Rend is a coloured render which is a replacement for the traditional sand and cement rendering of external walls. The render includes a pigment which means painting is not needed. Considered to be the largest UK independent manufacturer of silicone render, K Rend is part of a company called Kilwaughter Minerals which has more than 30 years of experience in construction. The process of k rendering is where a house is rendered using K Rend materials. Advantages of using K Rend

The silicone technology makes it a water-resistant alternative to traditional render. Its water-resistant properties also make it an easy render to clean. You can apply a K Rend coating to help protect the wall from moisture and rainwater. Does not trap moistureAs it cannot be installed in temperatures below 5°C, if you decide to install K Rend render in wet and freezing temperatures, it could delay the drying time. The bonding of the render may also be affected. K Rend tools and equipment We would recommend an experienced applicator who knows how to apply our products correctly, to our specifications, to ensure the 30 year BBA warranty is valid. Where is K Rend based? If you’re in a particularly exposed area, you can apply K Pro on top of your render. This is an extra clear, water repellent layer which helps protect the surface. If algae occurs, we provide an algae clean product which is easy to use and removes most common algae easily. My render is tired and dirty, does it need painted? Yes, we have samples which we can send to you FOC. Its worth doing this to get a proper representation of the colour. Its also worth putting the sample against any contrasting colours on your property such as windows or doors to ensure you’re happy with the tones. Do I buy the product from you? We also have dash or roughcast finishes if you prefer more texture than our Scraped Texture ranges. What colours are available?

This will entirely depend on your applicator, but they will provide you with a Supply & Fit quote which includes the product and all of the application costs (including labour). They will work out the price based on the square metres of area to be rendered. K Rend should be applied when it is 5 degrees C and rising. It should not be applied in very windy conditions, direct sunlight or damp conditions. It is very important that these products are not applied in temperatures under 5°C. This is because they hold a ‘working temperature range’ between 5°C and 35°C. For the render to cure, it is also vital that the surface is protected from frost or rain for at least 48 hours after it has been applied. Cost of using K Rend At Building Materials Nationwide, we supply a varied range of rendering products which includes cleaning products, silicone finish and accelerators. Speedy delivery options are available. For industry customers, we offer cash and flexible credit trade accounts to make shopping for tools and materials a smooth and easy process.

You shouldn’t need to paint render, just wash it down. If you paint it, you will lose the water repellency and breathability the product provides and also then enter the repainting and maintenance cycle. If you decide you want to change the colour, you can use our colour enhance product which helps maintain the properties of the render. How is K Rend applied? In comparison to traditional render materials, this silicone is less environmentally friendly. Traditional render, made from mineral-based materials, is less impactful to global warming by an estimated 10%. Plus, traditional render is 30% less impactful to aquatic environments such as oceans, seas, wetlands, rivers, streams and lakes. Top 3 tips to avoid K Rend problems

This is known as algae which occurs naturally in the air. Some geographic areas are more prone to it than others. The best way to stop algae occurring is to keep it washed down. K Rend provides a more appealing look compared to traditional renders. Even through tough weather conditions, it still upholds its natural appearance. There are many colours and finishes to choose from. From strong, vibrant shades to lighter tones, you will be able to make some precise adjustments to the outside of your house. Low maintenance

Because silicone render does not trap moisture inside the wall, it is a preferred choice compared to acrylic or cement render. It allows water vapour to travel through the substrate and is then freed into the environment. This enables a structure to breathe - its moisture resistance is why the render is primarily used for external walls. Disadvantages of using K Rend Of course, the cost of installing this render at your property will depend on its size and where you live. But the general costs for silicone render work are divided into costs per layer, including labour costs. Our top coat renders contain Silicone – this helps with the water repellency of the render surface whilst allowing the substrate to breathe. This ensures the render stays fresh by keeping the surface drier for longer, making it more resistant to algae growth. What is the cost of K Rend for my property?

Although this render is fairly easy to maintain, it can easily get dirty and is difficult to clean. Particularly for properties close to the coast, it is prone to algae growth and mould. This does cause its appearance to look unkempt, but you can buy special K Rend cleaner products to maintain its natural finish. Cannot install K Rend in certain temperatures It can be hand applied or with a spray machine – depending on the product, technical specification and applicators choice. Do you apply the product also? Within the Scraped Textured range, our K1 Spray or Silicone K1 products provide the smoothest finish. Within the Thin Coat range, the TC 05 is the finest finish as it contains a 0.5mm grain. Can I have a different texture of finish?