Joined in 2023 
82 
63 About this deal
Also, I have removed all 4 lights and switched-on the fire. This makes no difference to the problem as the fire still produces mist for 5 to 15 minutes and then closes-down, and it still re-starts itself, after 10 to 15 minutes. I'm thinking that this may illiminate the possibility that the lights are activating a heat-operated cut-out device (but of course I'm only guessing and could easily be wrong) Additionally: I have cleaned the transducer disc, although it didin't appear to need this . . . and it made no difference; I replaced the disc with same number (RM 0202) discs but these did not produce any mist at all (tried all three supplied with the same non-result). Replacing the original disc resulted in the return of sporadic mist, as stated earlier
Should you not be available upon delivery the courier may; leave the parcel with a neighbour, return the following day or leave the parcel in a 'safe place' on your premises, as per their terms. Ample do not accept any responsibility for parcels left safe should they go missing or become damaged from the choices made by the courier on delivery. Place the new transducer into the sump, ensuring that the transducer is correctly placed – the tab on the transducer should be lined up with the moulded recess in the sump and the unit should be sitting flat. STYLISH FREE STANDING ELECTRIC STOVE – Tango combines a classic feeling of a coal burning stove and modern functionality. With opening doors, faux coal fuel bed, cast iron effect and remote controlIn the first instance we will endeavour to repair the item if received damaged. Only when the manufacturer advises its unrepairable will we then issue a replacement. This fire can operate via a remote control and can even be used independently of the fully concealed 2kW heater, meaning you can enjoy the classic feel of the fire all year round. I am posting this because I am having problems which seem slightly different from all other Optimyst problems I've read about here The glass disk transducer is the visual heart of our Optimyst range, sitting inside our products and creating the ultra-fine mist that forms a key part of the world’s most realistic flame effect. How does it work?
This electric fire features Optimyst 3D flame effect which can be used with or without heat, which instantly adds an inviting, warming glow to the room. This fire can be operated by the manual controls located on the unit or the easy to use remote control. Optimyst uses ultrasonic technology to create the world’s most realistic flame effect, with an ultra-fine water mist that mimics flame and smoke. As the mist rises through the logs, warm light is emitted which reflects against the water, creating an incredibly realistic 3D illusion of flames and smoke which is commonly mistaken for the real thing.When I switch-on the fire effect I hear a bleep and the lights illuminate. 30 seconds later mist appears and makes a great job of imitating a real fire . . . so far, so good! As advised in the instructions for your Optimyst product, the transducer should be cleaned every two weeks and only filtered water should be used to fill the water tank/sump. If tap water is used, a build-up of limescale can impact the operation of the transducer and seriously hinder the smoke and flame effect. Ionised and distilled water should also not be used. Dimplex - Heating for Generations. Proud to be the trusted name for energy efficient electrical heating, ventilation and cooling for over 70 years. Comes with a 1 year guarantee included Then, between 5 and 15 minutes later, I hear a beep, the lights go out and the mist production ceases. If I leave the fire in this conditon it will somehow re-set itself after between 10 and 15 minutes, turning-on lights and mist to resume its normal, and very satisfactory, operation. This "start, stop, re-start" cycle continues for as long as the fire is left turned-on
Great Deal 
New Comment