Shelly Motion - disponibile da Aprile 2021 Wireless White

Product Information

The first will allow specifying a temperature, the second instead of a percentage of the valve position. Blind time: Select a blind time in minutes (from 1 to 10) after last detected motion. Select a blind time from the dropdown menu.

Unfortunately, there is no log of the past motion triggers so if you want to keep a record of this, you will have to use associated webhooks or MQTT to store it yourself. As a temperature sensor IMPORTANT! Direct sun light or close heating sources can trigger false motion detection. LED Indication Signals What’s really cool about this sensor is the custom options. Shelly Motion can detect individual motions every 3 seconds. Obviously, this more than anyone would ever need, so you can customise the following settings: If Home Assistant is running as a virtual machine or service on an operating system other than Home Assistant OS, you should open UDP port 5683 on the device’s firewall and/or ensure that communication from this port is redirected to the Home Assistant service. Enable to configure Shelly Device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network. Restrict login

Smart Scheduling

Other than the micro USB (hey guys what happened to USB-C?) and a reset pin, there are no other ways to interact with the device physically. WiFi protocol enables hub-less operation which is great for anyone just looking for an easy start and the well-developed app and web interface provide an array of interesting options. Shelly Motion – unique PIR IMPORTANT: Enabling the Client mode will disable the AP mode. In case you need the AP mode again, press and hold the Reset button for 5 seconds. Press and hold the Reset button for 10 seconds to factory reset the Device.

Just like the original sensor, Shelly Motion2 is a WiFi-enabled sensor that links with a 2.4GHz network (or creates its own AP point for situations where wireless LAN isn’t possible). Shelly Motion 2 (left) vs Shelly Motion The LED indicator behind the motion sensor lens ( C) will start flashing in red, green and blue sequentially for a while and then turn steady blue. The Device is now in AP (access point mode). Green brief flash: Unreported motion detection (the Device is not connected, or motion detection is disabled) If Channel Name is set in the device, the integration will use it to generate the entities’ name, e.g. Kitchen Light The integration uses Device Name to name its entities if the device has only one relay or no relays at all.Here are a few more sensors i made using this method. But in this case these yaml example are placed under the sensor section in your HA config not the binary_sensor section like the example above. sensor:... To control the sensitivity of the sensor you have a slider with 255 levels of sensitivity – you will definitely set it to activate on important events. As I don’t have pets, I can’t really verify how reliable this would be with having/not having pets trigger the sensor. Not everything is by the book. While the temperature in the device card is updated every couple of minutes, the graph in the app displays the average temperature at hourly intervals. It’s frequent enough to give you a general idea about the environment in your house, but not frequent enough to perform an efficient analysis of your heating system. Set the motion detection threshold (from 1 to 256) using the slider. A lower value sets higher sensitivity. See motion detection percentage above of the slider as you move it.

ATTENTION! Before beginning the installation, please read carefully and entirely this guide and any other documents accompanying the device. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any). Shelly Europe Ltd is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide. Introduction to Shelly® Do you remember Shelly? You should, as they have nifty devices for home automation. I was in love with their web GUI on Shelly 1 ( review) and their funky-looking Shelly Eye camera ( review) and now, Shelly is exploring another market: sensors with Shelly Motion. And there are lots to talk about. Shelly® devices can communicate directly with other Wi-Fi devices through HTTP protocol. An API is provided by Shelly Europe Ltd. For more information, please visit: https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Shelly Motion2 isn’t just about motion. It brings the most important metrics to your automation: motion, light levels, vibration and temperature. One could argue that humidity would be nice, but honestly – I’m excited as is.All of that is probably due to the big 6500 mAh rechargeable battery that the Shelly Motion 2 is having. This battery can last up to 3 years in standby mode and up to 1 year and a half with 6 hours usage per day. Always connected Wi-Fi Motion Sensor with over 1 year battery life. Featuring a 6500 mAh rechargeable battery. Real time motion detection triggers actions to other devices. Features The Shelly Mobile Application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used stand-alone or with various other home automation platforms and protocols.