TP-Link TL-PA4010KIT Nano AV600 Powerline Adapter Starter Kit, Up to 300 m range, No Configuration Required, UK Plug White

Product Information

If you want to add more adapters, please press the pair button on one of the existing networks, then press the Pair button on the adapter which wants to be joined in the existing network. Simply add them one by one as the instruction above. For TL-PA201/TL-PA211 V1/TL-PA210 V1/TL-PA251 V1, you need to hold the Pair button 3-8 seconds to start the pairing procedure. I read some article about the connection speed of homeplug will degrade over long distance, however I found the speedtest result is similar around 35Mbps even in a room just next to me (Room B) or a room quite far from me (Room D), so I believe it is not about distance issue. Ethernet Ports - The TL-WPA4220 (Wi-Fiextender) provides reliable high-speed wired connection for game consoles, smart TVs and more. Feature Filter: Alle User Application Requirement Configuration Guide Troubleshooting Q&A of functional explanation or specification parameters FAQs

How to add an extra powerline adapter to the existing powerline network with pair button 06-29-2022 487142 If the Powerline adapters cannot pair automatically with each other, please follow the steps below. The terms “AV500” and “500Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV500” or “500Mbps” powerline devices. Actual data speeds vary and may be limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues.For better performance, powerline devices should be deployed on the same electrical circuit and rated for the same HomePlug standard. A minimum of two powerline devices are required to establish a powerline connection. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product. How to set a new Powerline Network Name to secure your whole Powerline network using the tpPLC Utility on Windows 06-28-2022 116099 It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.I have got 4 TP-Link TL-PA4010 homeplug, the first one is connecting to the LAN port of the router, and the remaining are connecting to another room. Note: The models begin with TL-WPAxxxx will broadcast the Wi-Fi signal (“W” for “Wireless”); The models start with TL-PAxxxx only support the Ethernet connection. Sommige officiëlefirmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen. Open Source Code voor Programmeerders(GPL) IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

c. When the Powerline LED turns on, the new device has been successfully added to your Powerline network. Powerline adapters may cause intermittent connection of DSL modem router in a few rare cases 03-24-2022 70826Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Wi-Fi - Extend 300 Mbps wireless connections to previously hard-to-reach areas of your home and office * How to set up a new secure wireless network using Powerline ac Wi-Fi Kit by Pair button 06-28-2022 87214