Electric Shower | Triton T60x 8.5kW (Miami, Hawaii 2, Salsa)

Product Information

I have a Triton Trance 2nd generation shower, I've had it for over 3 years with no real issue. Now all of a sudden I have water coming out of the normal spout as well as from to the left of it, the water then comes out of the bottom of the shower along a water way which seems to have been put there. To me this is a problem with the pressure release valve or is similar to a tell tail hole in a water pump. Due to this shower having a larger footprint but with a the same water and cable entry points is can be used as a replacement.

The easiest way to achieve that is to get a replacement shower with the same or similar footprint of your existing unit. That maybe easier said then done, but here at Buyaparcel we are experts in sourcing as closer fit to your existing shower as possible. A higher kilowatt shower will have greater installation requirements than a lower kilowatt shower, therefore, you may need to upgrade your shower's electrical system to support a higher kilowatt shower. Here at Buyaparcel we have been dealing with Triton Showers over 30 years in that time frame there have been many different shape and sized electric showers released into the market. The average life of an electric shower is between 4-5 years. However many can fail earlier than that often due to limescale in hard water areas. Another consideration is to buy a shower with a fully adjustable riser rail. This will allow you to align your old screw holes with your new unit.I was able to identify the part easily with your diagram. It arrived within a couple of days. Perfect

Around 60% of UK homes are located in hard water areas, including many of our major cities – London, Brighton, Southampton, Bristol and Birmingham.

833/0040

Sorry for the delay in replie,there is no special tool to remove this part, like you said maybe move the other part to allow a bit more room A Triton Easy Fit electric shower gives you multiple cable and water entry points. Quite often these will feature Tritons Swing Fit and Swivel Fit technology.

The table below shows an example of the different typical requirements for a 7.5kW and a 10.5kW shower. Bought a new Triton Enrich (Screwfix) which is identical to the old one. During commissioning the prd didn’t blow so that was good. However, it still has the same problem that the old one had - when on the high setting it cuts out so the water is scald/freeze. The water pressure was unchanged from before replacement - in fact it had never been changed in the eight years since the initial installation - and the house water pressure has been stable for weeks. Did the commissioning procedure numerous times. When your Triton electric shower does decide it has had enough it is important to try and get a replacement electric shower with the same water entry points and electrical entry points to avoid unnecessary labour costs altering any of your existing pipework or electrical cables.The Triton T80 Pro-fit has a Dura-Flow™ heater can which helps reduce the build-up of limescale by up to 80% and in combination with the Dura-Flow™ easy access filter and showerhead, is simple and easy to maintain. Triton Swivel Fit™ - A 180° fully reversible swivel water inlet that accommodates water connections from either the left or right hand side of the unit to aid installation Not what you're looking for? See all Triton Pressure Relief Devices or try our unique Shower Spares Finder. If you are unable to find your old Triton Electric Shower footprint above then why not consider one of Tritons Easy Fit Electric Showers. Many of the 308 x 208mm x 108mm footprints are now being doscontinued with Triton opting to replace them with a slightly larger footprint that will cover the above old units. This has a footprint of 325mm x 210mm x 90mm.