New Door Restore | Restore Colour and Appearance of Faded Composite uPVC Doors | 250ml

Product Information

Polytrol works by saturating deep into the surface of the door, not by leaving a coating, so removal of the excess Polytrol is important. For more information about Paul and his company please see his bio below. We couldn’t wait to see the photos and share them with our other customers. I’m sure you’ll agree that the transformation is nothing short of marvellous! After cleaning, leave the door to dry for 24 hours before applying Polytrol. Make sure that your door is completely dry before moving on to the next step! 2. Apply the Polytrol Firstly, prepare the door. Remove any dirt, grease, grime or mildew from it. If there is any wax or polishes on the door, you will also need to remove this. If the door is only lightly soiled, a simple wash with warm soapy water, a gentle scrub and thorough rinse might be all that is needed.

Period front door restoration - Wooden front door refurbishment

Good preparation is key to a good finish. To have an excellent result you must begin with a clean door free to any dirt, grease, grime and mildew. As Polytrol work by saturating deep down into the surface, if you have any wax or polish applied to the door, this will also need to be removed before application of Polytrol can begin. Once you have finished using Polytrol, clean any brushes or other tools you may have used with white spirit. Cloths can be left flat to airdry before discarding. The door didn’t take us longer than 20 minutes so we could do it all in one go but if it will take you any longer than 20 minutes, you will need to work within areas that can be completed within this time-frame. Although we didn’t have any mildew on the door, if you do, don’t worry. Mildew can be treated with a 50:50 bleach and water solution. Just scrub it on, leave it for 10-15 minutes, then rinse it off.

If the door is particularly dirty you might want to consider using a cleaning product such as Owatrol Net-Trol. Or for the removal of mildew you may want to use something such as a 50:50 bleach and water solution. Using a brush or lint-free cloth, apply an even, generous coat of Polytrol. Leave it work for 10-20 mins and then wipe off the excess Polytrol with a new, clean lint-free cloth and leave to dry.