Sentinel - X800 Fast Acting Cleaner 1L, targeted central heating system cleaning inside an hour, restores system efficiency by targeting corrosion debris, ideal for hot and cold systems

Product Information

Vortex250 units feature an integrated isolation valve, a voiding the need for a strip down service; and a front-facing magnet, ensuring that where space is at a premium, no further space is required as the magnet can simply be removed at the front. Ideally, on the return pipe leading to a boiler. This is to stop debris entering the boiler and damaging it.

Sealed Systems: If the system is empty, add to any convenient point before filling. If full, use a Sentinel Dosing Vessel to inject via the filling loop or other access point. A good cleaner is Sentinel X400, or X800 which is somewhat more aggressive. X400 can be left in the system, but will cease to loosen sludge after about 4 weeks. X800 should be circulated and the system drained and refilled several times to remove it. Fernox and Kamco are reputable makers of similar products. How does it work? Acts as an emulsifier for oils and greases and a dispersant to lift and suspend particulate debris. Holds contamination in suspension ready for flushing. I am also planning on cleaning the magnaclean filter, could this also be part of the root cause to my issue?

It is recommended thatX800 Fast Acting Cleaneris used in accordance with standard cleaning and commissioning protocols such as BSRIA Guide “Pre-Commission Cleaning of Pipework Systems”.

Yes, the Sentinel – X800 is specifically designed to be safe for use on central heating systems. It targets corrosion debris without causing any harm to the system components. Ok, I've seen a few posts on this subject but none actually seem to give an answer, (so perhaps there isn't one?) Why? Removes potentially damaging contaminants and restores system effectiveness, reducing future breakdowns and increasing system life. Unrivalled chemical technology reduces circulation time to just 1 hour. Last night I drained 'some' water and added X800 (so it is just plain water and X800 in there at the moment).

Solutions

After cleaning, the system should be drained and flushed until the water runs clear. On refilling, the system should be treated with Sentinel X100 Inhibitor or Sentinel X500 Inhibited Antifreeze. After cleaning, the system should be drained and flushed until the water runs clear. On refilling, the system should be treated with Sentinel X100 Inhibitor, or Sentinel X500 Inhibited Antifreeze. For large or heavily fouled commercial systems, the cleaning period may have to be extended and the cleaning temperature elevated. Versatility is another remarkable feature of the Sentinel – X800. Unlike other cleaners on the market, this product is suitable for both hot and cold central heating systems. Whether you have a residential or commercial property, the Sentinel – X800 is your go-to solution for maintaining optimal system performance. Professional-Grade Quality Whether you have a hot or cold central heating system, the Sentinel – X800 is your ultimate cleaning solution. This versatile cleaner is compatible with various heating systems, accommodating the needs of both residential and commercial properties. No matter the type of system you have, the Sentinel – X800 will effectively remove corrosion debris, restoring efficiency and ensuring smooth operation. Easy to Use

It is recommended to use the Sentinel – X800 at least once a year for optimal system maintenance. However, the frequency may vary depending on the specific needs of your central heating system. Sentinel X800 Fast Acting Cleaner eliminates magnetite and limescale deposits from heat exchangers, radiators, underflor heating floors and pipework. It restores more uniform distribution of heat in existing installations, for a better heated home and reduced energy bills.Sentinel's range of filters is crafted to fit any situation. The filters we offerrange from ultra-compact, where space is at a premium, through the compact Vortex300 and the larger Vortex500, which is also suitable for heat pump installations. To clean an existing system in accordance with BS7593 it is strongly recommended that Sentinel X800 Jetflo is used with power flushing equipment which will provide a more rapid and effective clean. In such case, Sentinel X800 Jetflo will be administered via the power flushing equipment (follow equipment manufacturer'gs instructions). Alternatively, Sentinel X800 Jetflo should be circulated, preferably at normal operating temperature, with all valves open and the pump turned to maximum flow for a minimum period of 1 hour or until satisfactory performance is restored. What next? Add Sentinel X100 inhibitor, to prevent corrosion and the build-up of limescale, the main causes of central heating and boiler inefficiency. The circulation pump of the system can be used to circulate the cleaning solution; however equipment which provides a more rapid circulation can provide a more effective clean. When using an external cleaning rig, the product can be dosed directly to the buffer tank of the rig (follow equipment manufacturer’s instructions). litre, 1 300ml aerosol or 1 275ml tube of Sentinel X400 High Performance Cleaner is sufficient to treat a typical domestic system of up to 10 radiators. Larger systems should be dosed with twice this amount.