Joined in 2023 
82 
63 About this deal
Can These Be Controlled Through the Alexa Feature on a “Blast” Speaker or Is an Echo Specifically Needed? Many routers have 5 GHz and 2.4 GHz networks and most times your phone and smart device will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network. Dimmable Bright Light & Energy Saving】The light brightness can be fixed percentages from 1% - 100% output, you can set many different scenarios like 'Reading Light' 'Soft Light' 'sleeping Light' etc. Our Smart light bulb using LED rather than incandescent bulbs. It is less energy, produces less heat, good for saving energy.
AISIRER English_US - AISIRER
If your router is overloaded or has too many devices connected to it, try reducing the number of devices connected to your router. Alternatively, use a different channel or frequency band for your bulb. If you have a Philips Hue Bridge, you can also perform a full factory reset on the hardware by flipping it over and pressing the clearly marked pin-hole button above the serial number. Just remember that this will cause your automated lighting hardware to forget every light on your system, and not just the bulb that’s acting up, so proceed with caution. Make sure your phone and your bulb are connected to the same 2.4GHz Wi-Fi network. Also, ensure that the network signal is strong and stable. Yes, these can be controlled through the Alexa feature on a “Blast” speaker or any other device that has Alexa built-in. You do not need an echo specifically to control these lights. However, you need to enable the Smart Life skill on your Alexa app and link it with your Smart Life account. Then, you can use voice commands to control your lights, such as “Alexa, turn on the living room light” or “Alexa, set the bedroom light to blue”. Why Is My Smart Light Bulb Not Working?But the clever tech means they occasionally need troubleshooting, too. While most smart bulb bugs come down to Wi-Fi issues, occasionally only a factory reset will fix the issue. Sure, it’s a shame that we occasionally need to debug something as simple as one of the best smart light bulbs, but that’s the price we pay for convenience and the ability to make the room turn any color we choose.
Bulbs WiFi Smart Bulb B22 Bayonet, Colour Alexa Light Bulbs WiFi Smart Bulb B22 Bayonet, Colour
Turn the bulb off and wait for a few seconds now, turn the bulb on and off three times in a row, and wait for the bulb to blink. Verify that your router is compatible with your bulb. Your router should support 802.11b/g/n protocols and have a WPA/WPA2 encryption mode. Timing Control】 Never come home to a dark house - by using light schedules on the ‘Smart Life’ app and be greeted with warm white light. The timer function enables smart led light bulb power on and off automatically. Resetting a Philips Hue smart bulb is done via the official app. Assuming it shows up in there, go to the menu (the three dots in the top right-hand corner) and select “Light setup”. Press the “i” icon next to the bulb you want to reset, and tap “Delete”. The official instructions for resetting a Belkin WeMo smart bulb are a bit more detailed, but ultimately boil down to the same steps. Belkin suggests that you turn on the bulb, then switch it off for a second, before turning it on for 3-4 seconds, repeating the process three times.
Be sure that you are using a 2.4 GHz Wi-Fi network when connecting the smart bulb to Wi-Fi. Also, ensure that your home network is on a detectable status. For recent Lifx bulbs, the process is identical: simply turn your smart bulb on and off five times until it flashes to inform you that it’s complete. Dimmable Brightness Light & Energy Saving】Our smart light bulb uses LED technology to give you 7W of power, the equivalent to 60W traditional incandescent bulbs. Brightness can be adjusted from 1% up to 100%, saving up to 80% in energy and lasting up to 30,000 hours.
AISIRER Smart Bulb LED WiFi Bulbs Warm Light Dimmable 2700K
If you are facing any issues with your Aisirer smart bulb not responding to your commands, it could be due to the following reasons: No, these lights do not overheat if they are left on for too long. These lights are made of high-quality materials and have a low power consumption of 9 watts. They also have a long lifespan of up to 30,000 hours and good heat dissipation performance. However, it is recommended that you turn off the lights when you are not using them to save energy and extend their life. Can These Be Controlled Through the Alexa Feature on a “Blast” Speaker or Is an Echo Specifically Needed? If the connection works properly but your device can’t find the network, you may need to upgrade your router or add an extender to increase its range and connectivity.Remote And Group Control】Keep connecting this wifi smart bulb with your home network(only supports 2.4GHz Wifi), you can remotely control it on your smartphone or tablet to simulate someone being at home when you are away. Group control function allows you to control more than one bulb at the same time for scene-setting. So, try these troubleshooting tips if you are having a hard time getting your Aisirer Smart Bulb Won’t Connect to Wi-Fi: 1. Ensure the Bulb is in Pairing Mode Go to your router’s setting to disable the 5 GHz network bandwidth or ensure that you separate the two network bandwidths so you’ll know which network band you’re connecting to during setup.
Great Deal 
New Comment