Joined in 2023 
82 
63 About this deal
Are you in search of a reliable and high performance but simple 5v to 12v boost converter circuit? So here, in this comprehensive post, we have provided an insight of DC to DC Boost Converter & Modules, its schematic circuits, datasheet, pinout, features, and intended applications. I’m trying to develop a project for TEG’s where I’m gathering electrical energy from various sources.
5V to 12V Converter? - Cases and Mods - Linus Tech Tips 5V to 12V Converter? - Cases and Mods - Linus Tech Tips
You are using a 22µH inductor, which is at the high end of what the datasheet says. I started my design by copy/paste of an existing easyEda project which was with a 4.7µH… what is the difference between the 2 choices? what would you recomend I use for my design? Would you have a part number to suggest? The output source impedances are typically 150Ω, providing useful output currents up to 10mA. The low quiescent current and high efficiency make this device suitable for a variety of applications that need both positive and negative voltages generated from a single supply.I have shared my project on easyEda at: https://easyeda.com/editor#project_id=9220fa26c27845ae8d1bbd93b3a543d9 The USB 5v to 12v dc dc converter is a compact portable electronic device that is designed to boost up 5 volts from the USB port to 12 volts efficiently. As we know that 5 volt USB supply is available everywhere but what if we require a 12 volt power supply for any application then this device comes to the aid. Meeting power demands in modern day electronics is quite a challenge and there are times where we will not be able to supply sufficient voltage for our circuits. In that case we need to go for DC to DC boost converter circuits like these to step up the incoming voltage to a certain usable level. These kinds of step up converter circuits will be useful in Solar powered projects, Lighting systems, Battery powered projects and so. MT3608:
Analog Devices MAX680 Datasheet and Product Info | Analog Devices
A hub only adds more headers if you have a motherboard with 1 3-pin 5v header. My motherboard has 0 3-pin 5v headers. Correct. A 5v ARGB device (fan, LED strip, etc) plugged into a controller that only receives an 12V RGB and converts it to a 5V signal can ONLY display that single color. It is not able to display multiple colors like a normal ARGB connected device would. As I said, not an electronic engineer, hence my beginer questions… As a general rule, it seems that each IC is asking for input/decoupeling capacitor on 5V/VCC, is it ok to not put all these caps and reduce component load? Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna Simillary to my question in 1), the 5V rail has 0.1µ, 4.7µ and 22µF capacitor, can I do the economy of at least one of these (once again, PCB space reducing)?This design has a 22µF “output” capacitor. But I already have a 100µF capacitor as an “entry” to the A4988 stepper. PCB space is VERY limited for me. Can I just use the 100µF and drop the 22? Below schematic is implemented using variable output high efficiency IC MT3608. A compact and small form factor of this module/IC makes it possible to install this IC in size and weight imperative devices. Also works on very low current drawing loads contrary to its competitors.
Great Deal 
New Comment