De-nibbing Pads (Finishing Pads) - Used to Give Wooden Finishes a Perfectly Smooth Feel After the Application of an Oil or Varnish (5)

Product Information

Meguiars Smooth Surface Clay Kit removes contamination and restores a smooth surface to your paint finish!

Read our ‘Guide to Installation & Aftercare‘ to find out more about what you will need to keep your wood worktops looking great for longer.After that, it is easy! If you oil regularly for the first six weeks, the worktop will build up oil protection sufficient so that you may leave this and only re-oil once every three months. Perfect-It™ Denibbing System uses pinpoint micro-sanding to remove dirt nibs without flattening painted surfaces Support for Smaller Spaces Our worktops are supplied pre-sanded to a 150 grit finish, but sometimes it is worth going over the worktop yourself for an extra smooth surface. Use 120 grit orbital sanders all over, then finish by sanding the top and edges lightly with a pad. This will remove any splinters. Thank you for getting in touch with your enquiry. There is a chance that it will help but its difficult to say for sure with out seeing the doors and the variance that you have experienced. I would be happy to take a look at some photos if you would like to send some in to [email protected]. After the surface is completely covered rub down with a clean lint free cloth to make sure oil coverage is even.

Sometimes referred to as synthetic steel wool, de-nibbing pads offer a cost effective alternative to other flattening mediums, such as sand paper and steel wool. here. When you do apply a surface finish, such as a varnish or a paint it’s only natural you are going to get imperfections such as brush strokes and bumps or areas that have slightly more finish than others Oils are generally much easier to patch repair if they are damaged. Localised damage can be patch sanded and more oil applied. You will need to denib between each coat but not after the final coat. The pad bolts securely onto the pneumatic 3M™ Polisher PN28363, and accepts 3" polishing pads including our 3M™ Perfect-It™ Foam Polishing Pad PN 05760.It can be done with any oil finish and will just improve and smooth the surface for a slight more superior finish, if you don’t do it is not the end of the world, but it is something that we recommend.