Dryzone Anti Mould Paint 1L Magnolia – Mould Resistant for 5 Years, 10m² - 12m² coverage

Product Information

Thermapaint Anti-Mould is widely used by private landlords and social housing providers to treat persistent problem areas. It can be applied by roller or brush like any normal emulsion. Thermapaint Anti‐Mould raises the temperature of the wall surface in the room by between 0.5 and 1.2 degrees which is usually sufficient to reduce the incidence of localised condensation by up to 96%.

5 Best Anti Mould Paints UK (2023 Review) | Spruce Up! 5 Best Anti Mould Paints UK (2023 Review) | Spruce Up!

Of course, it makes a lot of sense to look at the environmental factors within your home to see if there are things you can do to stop mould in the first place. Pre -treatment: It is essential to pre-treat infected areas with Kingfisher Mould Cure fungicidal wash. b) Wearing normal domestic rubber gloves (as you would when using bleach), sponge or wipe onto the affected area. Try to draw the sponge in a single sweep from the outer edge to the centre of the infected area and rinse in the dilute solution each time. This reduces the risk of spreading the spores. Leave for 3 to 4 hours or preferably overnight for full action to develop.Unlike most other paints on our list, Dulux has the advantage of providing a lovely soft sheen finish that doesn’t need to be painted over once set. The cool neutral range of colours means you can choose any colour from White Mist to Slate Grey, leaving your bathroom with a modern chic look. Yes, anti mould paint does a good job at inhibiting mould growth in areas where moisture and condensation is a problem as the biocides contained within the paint damage the cell membranes and essentially kills it before it has the chance to grow.

Best Anti Mould Paint in the UK | Voted for By Professionals Best Anti Mould Paint in the UK | Voted for By Professionals

Thermapaint Anti‐Mould is not a substitute for adequate ventilation and should not be used in areas where excessive or uncontrolled condensation is allowed to accumulate for long periods. Thermapaint Anti‐Mould will cover most existing matt finish emulsions, but care should be exercised with some eggshell, silk and vinyl finish which are typically resistant to over‐painting. Such surfaces may be “keyed” with a power orbital sander or some may respond to priming with Kingfisher Floor and Wall Sealor Weatherflex Stabilising Solution Care should be taken when sanding any pre‐1960s wood or metal finishes as these may contain harmful lead. Ronseal isn’t the cheapest anti mould option on the market but at the end of the day you get what you pay for. If you want to prevent mould growth, this is the paint for you. Any surface defects should be filled before painting with a premium plaster filler e.g. Everbuild TM. All Purpose Filler. Seal any areas that remain powdery with Kingfisher Floor & Wall Seal. Thermapaint Anti-Mould is the only paint to combine condensation controlling microsphere technology and anti-mould chemistry to stop re-infection. Unlike some anti-fungal paints, it is low odour and fully wipe-able when cured.

Credit limit exceeded

c) With the same measured solution as above, gently wipe the whole area again to remove any remaining mould residues. Wipe inwards from at least a meter past the edge of the visible infestation to catch concentrations of invisible spores which tend to gather at the periphery of the affected area.Leave the surface to dry (this should take approximately One hour) and ideally paint within 7 to 10 days of pre‐treatment. When it comes to damp proof products, Dryzone are one of the first brands to come to mind for us so any list about anti mould paint is naturally going to warrant a double inclusion. This time, we’re talking about their magnolia paint. This particular paint is professional strength (but lower odour) and is one of the most effective paints when it comes to preventing damp and mould even against the most persistent condensation. The information given in this product data sheet is given in good faith, based on current knowledge and experience. It relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of the company’s knowledge and belief, accurate as of the date indicated.

6 Year Anti Mould Paint | Anti-Mould Paint | Ronseal 6 Year Anti Mould Paint | Anti-Mould Paint | Ronseal

Now onto something a little bit different. Having the best anti mould additive to hand gives you so many decorative options and for this category we would go with Dryzone’s Anti Mould Additive. In my professional opinion I would avoid purchasing budget anti mould paints. Adding biocides which will ultimately protect your surfaces from mould growth isn’t cheap. So chances are, a budget anti mould paint isn’t going to have a high content of biocides. Whilst not specifically labeled as anti mould, Dulux’s Easy Care Bathroom paint works much in the same way as some other paints on this list. The product has a shelf life of 12 months from the date of manufacture, subject to correct storage conditions. Whilst the majority of paints on this list are perfect for the average DIYer due to their ease of application and value for money, sometimes there’s nothing quite like using the best product that’s trusted by professionals.Get Prices for a Professional Decorator Near You Best Anti Mould Paint Overall: Ronseal Anti Mould Paint In terms of aesthetics, this anti condensation paint has a clean, white matt finish which in itself is a look worth keeping. Seal new or bare surfaces with a thinned coat of “Kingfisher Classic Emulsion” (1 part water to 5 parts paint). It’s very easy to apply and once fully set leaves a soft sheen finish in magnolia resulting in a look that is sophistic yet simple.