Joined in 2023 
82 
63 About this deal
Also available in lengths of 300 mm, 500 mm, 600 mm, 800 mm, 1000 mm, 1250 mm, 1500 mm, 1850 mmand 2000 mm.
3m Screeding Level - Aluminium 3m Straight Edge
The straight edge board is suitable for levelling and ruling off plaster and render. Also ideal for screed and floor work. For a proposed revision of BS 8204 in 2003, a straight edge with feet was again suggested, which was intended to be more portable than the 3m straight edge. This consistedof a collapsible 3m long frame with a wire stretched to standard tension from which to measure the deviation was proposed. This method was rejected in favour of a 2m straight edge set on the slab and is the methodis adoptedin the currentBS 8204,BS EN 13670 Execution of concrete structures, the National Structural Concrete Specification and National Building Specification.The location and orientation of tests can be discussed by calling Face Consultants on +44 (0) 1484 600090. It may be necessary to ensure repeatability in the case of any dispute. Related Documents Our tools have been in action for over 75 years. Each and every one is engineered to last and has been since 1944. ReferencesT.S.O. - Highways Agency - Specification for Highway Works. This document details requirement in term of the maximum permissible number of irregularities beneath a Rolling Straight edge. Lovely looking straight edge, not used it yet as I intend to use it on a special job in France. Don't anticipate any problems great tool delivered in perfect condition.
Draper Feather Edge 1800mm | Toolstation Draper Feather Edge 1800mm | Toolstation
A method of assessing flatness was given in CP 204: 1965 In-situ floor finishes (metric edition 1970) which used a 10ft (~3m) straight edge that was not set directly on the slab but on feet. No apparatus description was given, nor methodology to cover its use or sampling criteria. The idea was to assess unevenness below the temporary datum of the straight edge as a +/- measurement. TRL - Supplementary Report 290 - details the calibration, maintenance and use of the Rolling Straight edge. ACCURATE, SAFE AND PERFECT FOR EVERYDAY USE BY CAREFUL PROFESSIONALS. DESIGNED BY MAUN TO GET THE JOB DONE.This method of testing is described in both BS8204-Part 1:2003 and BS8204-Part 2:2003. A 2m straight edge is used in both specifications. Please keep your proof of postage from the Post Office until we have confirmed that we have received your returned items. Tradewise SE4 Aluminium Straight Edges are made from 76mm x 38mm robust aluminium box section. These straight edges are designed for levelling and finishing wall and floor surfaces. The section is 76mm x 38mm.
Surface regularity - straightedge Standards - Concrete Surface regularity - straightedge Standards - Concrete
If the rate of testing is not known, then we would recommend the following formula to calculate the minimum number of straight edge tests. The straight edge, reinvented by Maun for improved safety. We see problems and find innovative ways to solve them.
3m Screeding Level - Aluminium 3m Straight Edge - Reviews
SpecificationThe rolling straight edge is shipped in 3 wooden cases with a total gross weight of 112kg. UK Mainland excludes Northern Ireland, Scottish Highlands, Offshore Islands and the Channel Islands. Optional 2.5 mm incremented wedges are available, which offer a range of 12.5 mm low to 12.5 mm high. Specifications Heavy Duty Straight Edges. Aluminium Box Section Straight Edge & Screed Rule. For levelling & ruling off, plaster & render, and floors & walls. For levelling & ruling off, plaster & render, and floors & walls. Used in a wet room it proved provide quality detail / finish to a potential dodgy detail. Etched primed and spray finished to match sanity ware.
Great Deal 
New Comment