Laser 6869 Safety Locking Wire 0.8mm x 30m

Product Information

Witness wires also serve the purpose of providing a rapid method for ensuring critical safety equipment or systems have not been used or tampered with since their last repair, reset, or inspection, and also that the container of such equipment has not been inadvertently opened, disturbed or tampered with, therefore providing confidence in their readiness for use. In a similar manner, critical system switch covers are protected from inadvertent activation, through the application of witness wire. DFARS 252.225-7008 and 225.225-7009: Daniels Manufacturing Corporation is compliant in accordance with this reference.

Steel tie wire is among the most common types of tie wire. The process of making a tie wire reel involves annealing the wire. Annealing wire means to heat a wire to a certain temperature and then cool it at a certain rate. The desired result of annealing wire is to increase the ability of the wire to change shape with ease. Safe-T-Cable is an alternative to safety wire. Safe-T-Cable is defined as a group of strands right-hand helically twisted without a core. This eliminates the need for twisting during installation, as is required with safety wire. Several companies manufacture safety cable, and it is becoming an industry standard due to easier control of critical inputs and reduced installation time. Installation and quality requirements of Safe-T-Cable are governed by SAE AS4536. [9]If you are looking for a stainless safety wire company who can cater to the safety wire military specification, we are the team for the job. Our safety wire material is used for safety critical fasteners, twists, and much more. We are a leading provider of safety wire material. A pigtail of 1⁄4 to 1⁄2 inch (three to six twists) should be made at the end of the wiring. Some aircraft manufacturer recommends that the length of the twisted part (pigtail) must be between 10 mm to 15 mm. Electro Polished and Clean Wire– We offer diameters as fine as .006” to .041” diameter on spools. The most commonly supplied wire is the 300 series of stainless steel.

Safety wire is not intended to take the place of the proper installation of fasteners. Always make sure that the fasteners or components are tightened to the proper torque first, then install the safety wire.Single wire method used on screws, bolts, and/or nuts in a closely-spaced or closed-geometrical pattern such as a triangle, square, rectangle, or circle. The single wire method may also be used on parts in electrical systems and in places that are difficult to reach. Defence Standard 00-970 Part 1 Section 4 Issue 2 (PDF) (Issue 2ed.). Ministry of Defence. 1 December 1999. pp.12–14. When using the double wire twisting method of safety wiring, .032 inch minimum diameter wire should be used on parts that have a hole diameter larger than .045 inch. Safety wire of .020 inch diameter (double strand) may be used on parts having a nominal hole diameter between .045 and .062 inch with a spacing between parts of less than 2 inches. This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Standard materials: Stainless steel type 302/304 ASTM A 580, 305 and 316 stainless available upon request for the Aerospace Industry.