TOPWAY Tile Leveling System 400pcs Pack 3mm Levelers Spacers for Building Walls Floors

Product Information

The Raimondi Tile Levelling System uses special traction-adjustable pliers that are available in two different versions, one for floor applications and one for wall applications. The Raimondi VITE cap also features a hollow design so that users can see the grout joint easily on intersections. Once the adhesive is set, remove the cap by beating it with a Raimondi White Rubber Mallet to avoid marking the tiles (or with the foot). Beat parallel to the joint line. As an alternative, unscrew the cap, remove it and beat directly on the clip (parallel to the joint line). A Raimondi Tile Levelling System Starter Kit is also now available from the drop down menu above, which is comprised of 250 x 1.5mm 3-12 Spacer Clips, 250 Wedges and a pair of floor levelling pliers.

Raimondi Tile Levelling System - Tiling Supplies Direct

The Mustang Tile Levelling System is also available as a starter kit in a handy tub that contains 100 x Mustang base clips (1mm, 2mm or 3mm), 100 x Mustang wedges and 1 x Mustang precision application tool. These are extremely useful for smaller installations or where only a certain quantity of base clips are required. How to use the Mustang Tile Levelling System:

The Raimondi VITE Tile Levelling System is a tool-less tile levelling system comprising of a threaded cap and clip that is tightened by hand. Also available is a anti-chipping/anti-scratch plate that can be used in combination with Raimondi Tile Levelling wedge/clip system to avoid potential accidental damage during installation of tiles that have a particularly delicate top finishing. You place it in between the wedge and the tile by inserting it on the clip before wedge insertion. The anti-scratch plate performs two functions at the same time: Anti-chipping since it prevents the stems of the Raimondi Tile Levelling System clip from touching the edge of the tile during wedge insertion thanks to a dedicated L-shaped tab; And prevents scratching by ensuring the wedge does not touch the tile but slides on the platform instead.

Spacers and wedges | Topps Tiles Spacers and wedges | Topps Tiles

If you are using this system over a large area with a lot of clips, the Raimondi LEVMATIC Battery Powered Levelling Pliers makes pushing the wedge into the clip effortless and reduces fatigue. Screw: Allows fast tightening of the cap onto the levelling clip until it sits onto the tile. A consistent tightening torque setting on the drill clutch can be utilised to achieve a consistent perfect level across the entire surface.Pull apart: When separating the broken off clips/caps when the levelling job is finished can be sped up by using the drill on a reverse rotation to remove the cap from the used clip. Insert the Raimondi Tile Levelling System wedge in the clip (base) slot, using the Anti-chip/scratch plate if required, paying attention not to pass the breakpoint.

Tile Levelling | Levelling Systems | Topps Tiles

Once the adhesive is set, the protruding part of the support has to be separated from the base, which is embedded beneath the tile edge. This can be done using a Raimondi White Rubber Mallet to avoid marking the tiles (or with your feet). Beat parallel to the joint. After having spread the adhesive, insert the Raimondi Tile Levelling System clip (base/support) underneath the tiles and along the 4 sides. Remove: Allows for an innovative removal of the clip once set by setting the tightening torque on the driver to its maximum setting, tightening the cap until the clip breaks.The Raimondi VITE Xpress tool can be used on both floors and walls, and works with individual caps as well as caps with anti-scratch washers.