QUICK FIST Clamp - Gun Clamp

Product Information

b) The result of any examination of the state of the contents and the notification made to the owner, or his authorised agent. A system of secondary lighting, to comply with the requirements of BS5266- 2016, must be provided in the event of a power failure. iii) on a 6mm steel door with framing, the outer carrier may be the existing angle with a 6mm reinforcing plate welded continuously to the inner face of the angle and extending at least 25mm above and below the bolt slot top and bottom edges.

This guidance should be applied with full regard to the individual circumstances and the type and location of the premises subject to any recommendations. It is important that the proposals in each case take into account the safety of the occupants of the premises; in particular, attention is drawn to the provisions of the Fire Safety Acts, building regulations and the Occupiers Liability Act. e) The location of storage points within the property and, where appropriate, the distribution of firearms within each secure point; To that end, the following are recommended methods of transporting those explosives in a safe and secure manner by road. They do not cover the restrictions placed on the carriage of explosives by rail or by any form of public transport.Never point the gun – Avoid pointing the gun at anyone, at all times. Whether you know the gun is unloaded or not, it saves people a world of worry if you make sure you don’t aim the rifle in the direction of one of your fellow shooters.

c) the surround must be secured by rag bolts or similar high strength masonry devices both on the external and internal faces of the “T” section surround. The outer side ones welded or splayed to prevent removal. The fixings should not be greater than 400mm apart, and not more than 150mm from the corners. b) The remoteness or otherwise of the premises, and the potential response to calls for assistance, either by police or neighbours. i. Sheet steel body of not less than 2mm (14swg), formed by either folding, continuous welding or a combination of these methods; Keys are to be only issued to authorised persons and trusted and vetted partners. . Private Collections and Collections on Public Display Dependent upon the risk, grilles and bars may be either permanently fixed or removable when the premises are open.

THE MAGAZINE

c) arrangements are provided that allow for the return of the firearm being used to a secured exhibition container or safe at the conclusion of its use in the presentation. Conditions on movement & display of section 7(1) firearms