Rapid Racer Products RRP ProGuard Bolt-On Front Mountain Bike Mudguard

Product Information

Any other chemicals other than what is listed above should not be used on the ProGuard mudguards as it will likely remove the gloss finish. PROGUARD FEATURES INCLUDE: Our widely acclaimed Seal Shield offers greater protection for your fork seals from high velocity mud and spray lengthening service intervals MATERIAL Delivery timescales are esimates in working days; Public Holidays, Saturday's and Sunday's are NOT classed as working days.

GT85/WD40/Solvents - Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike. Forks: This direct mount mudguard is designed for the forks listed below ONLY IF THEY HAVE Threaded holes in the rear of the fork brace Fits Fox 32, 34, 36, 38, *40 (2021) 49 The ProGuard is our amazing new range of FRONT and REAR mudguards for disc brake mountain bikes offering unmatched protection from mud and spray, it’s perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. Our design intent was to increase the tyre clearance, improve fit, and reduce the mud clogging issues seen with this type of mudguard. The MINI offers a very compact design for all year round protection, The STANDARD offers superb protection in a shorter more compact design, whereas the longer MAX PROTECTION version (21mm longer at front than the STANDARD and 68mm longer at the rear) offers incredible unmatched levels of protection. Available in 3 sizes Front Mini: This is another one of those, “why didn’t they think of that sooner” scenarios and I’m still confused why most suspension manufacturers didn’t a) work with someone to make one for their product or b) make one themselves. Designing suspension is the focus but why not make use of what’s already available to provide more for your customers? The best mountain bike mudguard currently available on the market is the RRP ProGuard Max Protection Mbr Magazine (Feb 2020)

Speak to the team: 01823 252499

Our special polypropylene mix has been specifically blended for super high impact resistance and cold weather performance: From time to time carriers may deliver earlier or later, or on non working days however this is cannot be guaranteed nor should it be expected. Then feed cable ties through teh sames holes from the rear to the front (you must use min 5 cable ties to ensure the guard is secure) Squeeze the side wings of the mudguard hard and slide under the fork brace from the rear with the wheel and tyre still in place Once happy you must tighten the cable ties with fat pliers as tight as possible (remember cable ties don’t’ scratch forks….loose cable ties do!)

cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring 4 leaving the other 2 for the fork brace (although more could be added if desired)COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS: RapidRacerProducts Ltd accepts no liability for any damage / injury caused due to improper fitting / use of our products Important - The snap-off hole will break off fast so ensure thre is nothing underneath the guard that the screw driver can hit, failure to do so may lead to damage or harm Both fenders perform great and have mostly been set and forget items. Aside from the occasional extra flex of the Standard, they go unnoticed but you'll make note of the clear vision they provide. Use the Allen key provided to screw the bolts in EVENLY a bit each side, go gentle to start off to ensure you DON'T CROSS THREAD THEM, stop once it's pulled together so you can still move it

Delivery timescales are based on working days; Public Holidays, Saturday's and Sunday's are NOT classed as working days. Tom didn’t get any shit in his eyes all winter, no glasses, super wet, crazy muddy, nothing on face, it will protect you and your bike from the very worst of conditions Enduro-mtb Magazine review All applicable customs and import duties and any other charges are the responsibility of the customer. Tires up to 3 inches are said to work with it (Tested with a range of 2.5-inch tires from Maxxis and WTB)Important - If you have a brace between the seatstays - you must attach at least one cable tie to it if you don't have a brace between the seatstays - you must use 3 cable ties on each arm The RRP ProGuard Bolt-On Mudguard is designed to keep water and mud out of your eyes and off your clothes as well as helping to protect your fork stanchions and wiper seals from getting hammered by mud, dirt and water at high velocity from your front wheel. This helps to minimise cleaning post ride and maximise intervals between services. The ProGuard BOLT ON will fit most fork models listed below if they have the *THREADED HOLES at the rear of the fork brace (DISK BRAKE ONLY): WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS: DUE TO THE CURRENT HIGH DEMAND, DELIVERY TIME FOR BIKES IS 7-10 DAYS. ALL PARTS AND ACCESSORIES ARE STILL 1-2 DAYS. RapidRacerProducts Ltd, Parkfields Business Centre, Park Street, Stafford, ST17 4AL, United Kingdom