Dual Flush Valve Body to Suit Ideal Standard SV93467 1.5" Pneumatic Armitage Shanks EV98167 Without Basket

Product Information

Sottini Conceala 2 universal height, top inlet cistern - pneumatic dual flush valve - no flushplate - 6 or 4.5 litre flush These valves are fitted to Conceala 2 concealed cisterns with either Armitage Shanks or Ideal Standard branding

If only one of the buttons on the S4399AA dual flush plate has stopped working the most likely problem is that one of the SV70367 pneumatic diaphragm washers fitted into the top of the flush valve has failed We are currently using Royal Mail Parcelforce and DPD as our delivery providers, all small items will be delivered by Royal Mail, these can take up to three working days to reach you. Ideal Standard have only ever manufactured one type of seal and clip, so if you have a seal and clip like this, then this listing will be the replacement you require. Refitting the valve is reversal of removal, taking care to locate the tabs of the valve body into the lugs of the valve seat. Conceala 2 universal height, bottom inlet cistern - pneumatic dual flush valve - no flushplate - 6 or 4.5 litre flushNOTE - THE ORIGINAL VALVE SV93467 IS DISCONTINUED HOWEVER WE NOW SEND OUT THE REPLACEMENT VALVE WITH NO CAGE. NOTE: Replacing the diaphragm may not always resolve your problem as the fault could be with the valve itself but it is a cheap way to try and resolve and is usually successful. We also recommend washing your valve in warm water to ensure any limescale or grit which could be causing an issue is eliminated. Table below provides a guide on how to identify and choose your correct ideal Standard Armitage Shanks Fastpart Spares Push Button flush valve /SYPHON, The SV01967 AMSTD FASTPART SEALwill fit all the Flush Valves in this table. PLEASE NOTE YOU WILL NOW RECEIVE THE NEW VERSION AS PICTURED, PLEASE SEE SECOND IMAGE FOR REFRENCE. THIS IS JUST FOR THE FLUSH VALVE ONLY, DOES NOT COME WITH THE SEAL, CLIPS, NUT. ETC If the only way to access is essentially breaking through the tiled top – is there any way to do this to limit the damage/repair work needed?

As of 01/07/2022 - Ideal Standard have no baskets available to fit this model. Please reuse the existing basket if able to do so. We will update this description with the basket part number once it becomes available.HINT: BE CAREFULwhen removing the flush valve from the basket as your flush valve may have gone a little brittle over time and we have known instances of the clips on the basket breaking off and it is then not useable. If the flush valve is letting by water into the pan the most likely problem is that the flush valve washer has failed I was going to replace the whole mechanism (it seems to be an Ideal Standard Pneumatic Dual Flush Valve SV93467) - but my problem is I can only access it through lifting up the flush plate – as it is a concealed system that is tiled in. I can easily twist and uncouple it, but only the thinner rectangular top end will fit out the gap, but the wider circular bottom end will not. Looking in the cistern it isn't over-filling, it just seems that it is not fully sealing off - either because the seal is worn or the mechanism is too lime-scaled up.