CISCO 10GBASE 3m SFP+ Cable

Product Information

The Cisco 10GBASE-ZR module supports link lengths of up to about 80 kilometers on standard SMF (G.652). This interface is not specified as part of the 10 Gigabit Ethernet standards and is, instead, built according to Cisco specifications. SFP-10G-ZR-S does not support FCoE. The Cisco Nexus 3000 Series Switches have a 1-year limited hardware warranty. The warranty includes hardware replacement with a 10-day turnaround from receipt of a Return Materials Authorization (RMA). Cisco Trust Anchor module: A tamper-resistant, strong cryptographic, single-chip solution uniquely identifies the product so that its origin can be confirmed to Cisco, providing assurance that the product is genuine.

The Cisco SFP-10G-SR-I is a multirate 10GBASE-SR, 10GBASE-SW and OTU2/2e module for industrial operating temperature range. This module also supports CPRI datarate options 3, 4, 5, 6, 7, 7a, 8. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz *km MMF(OM3), up to 300m link lengths are possible. Using 4700MHz *km MMF (OM4), up to 400m link lengths are possible. Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Bài viết này, Cisco Chính Hãng đã cung cấp cho quý vị một cái nhìn tổng quan nhất về những tính năng cũng như thông số kỹ thuật chi tiết về Thiết Bị Mạng Cisco SFP-H10GB-CU3M Hy vọng qua bài viết này, quý vị có thể đưa giá được lựa chọn xem module Cisco SFP-H10GB-CU3M có phù hợp nhất với nhu cầu sử của mình hay không để có thể quyết định việc mua sản phẩm. Ciscochinhang.com là nhà phân phối cisco giá rẻ. do đó, khi mua các thiết bị cisco của chúng tôi, khách hàng luôn được cam kết chất lượng sản phẩm tốt nhất và giá rẻ nhất. Hàng luôn có sẵn trong kho, đầy đủ CO CQ. đặc biệt chúng tôi có chính sách giá tốt hỗ trợ cho dự án! permanent resident of the U.S., as defined by 8 U.S.C. § 1101 (a)(20), or is a protected individual Reference links to information about key environmental sustainability topics (mentioned in the “Environment Sustainability” section of the CSR Report) are provided in the following table:The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BX40D-I transmits a 1330-nm channel and receives a 1270-nm signal. The SFP-10G-BX40U-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The Cisco SFP-H10GB-CU3M 10G compatible Passive Twinax Cable datasheet and specifications are based on our 10G-PDAC-SFP-3 cable. SFP-H10GB-CU3M 10G Passive Twinax Cable is intended for use with Cisco platforms with total interconnection lengths of up to 3 meters. This 10G Passive Twinax Cable is made up of passive copper cable rated by AWG (American Wire Gauge) with number 30 representing the resistance of copper cable that is permanently linked to MSA-compatible SFP+ transceiver assemblies at each end of the cable, delivering consistent link length. Passive Twinax cables do not have active electronic components like active copper cables or optical lasers like AOC cables, making them a very cost-effective method for short-distance interconnections. The Cisco SFP-H10GB-CU3M compatibility states that 10G Passive Twinax cable supports multi-rate communication between 1.0625 and 10.52 Gbps for applications such as 10G Ethernet (10.31 Gbps), Gigabit Ethernet (1.25 Gbps), and other high-speed networks. The most common applications for Cisco-compatible SFP-H10GB-CU3M are cost-effective close-range interconnections within telecom operators or data center equipment rooms, interconnecting LAN or SAN applications with speeds up to 10G. Our Cisco-compatible cable is intended to work with any major Cisco platform which supports SFP-H10GB-CU3M by Cisco compatibility matrix. Virtual PortChannel (vPC) provides Layer 2 multipathing through the elimination of Spanning Tree Protocol and enables fully utilized bisectional bandwidth and simplified Layer 2 logical topologies without the need to change the existing management and deployment models.

High availability: Stateful switchover with 1:1 active standby and N+1 redundancy keeps your network, services, and clients always on, even in unplanned events. The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard Single-Mode Fiber (SMF, G.652).

The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade Multimode Fiber (MMF). To make sure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3 or OM4. For additional information on mode conditioning patch cord requirements please see: https://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html. Power supply warning events in which the power supply continues to operate (high temperature, highpower, and slow fan) The SFP-10G-BX40D-I and SFP-10G-BX40U-I SFPs support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652).

Bluetooth ready: The Cisco Catalyst 9800-80 has hardware support to connect a Bluetooth dongle to the controller, enabling you to use this wireless interface as a management port. This port functions as an IP management interface and can be used for configuration and troubleshooting using WebUI or the Command-Line Interface (CLI), and to transfer images and configurations.

API-driven configuration: Modern wireless controllers such the Cisco Catalyst 9800-80 Wireless Controller support a wide range of automation features and provide robust open APIs over Network Configuration Protocol (NETCONF) using YANG data models for external tools, both off-the-shelf and custom built, to automatically provision network resources. The Cisco Nexus 3064-T and 3064-32T support IEEE 802.3an standard cables and transceivers to provide 10‑Gbps connections over unshielded or shielded twisted-pair cables, over distances of up to 330 feet (100meters). It provides a cost-effective and highly scalable 10 Gigabit Ethernet implementation over structured copper cabling infrastructure that is widely used in data centers.

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. For more information about the transceiver types, see: https://www.cisco.com/en/US/products/hw/modules/ps5455/prod_module_series_home.html.