Aladdin EasyFit Isolator Valve and Tools Pack - Starter Kit

Product Information

There is also a circular ½” BSP valve (Antrax) which has 3 side ports that allow a U key to be used to rotate the valve and screw in/unscrew from a radiator. It provides an effective and robust product for all plumbers, maintenance engineers, water companies, housing associations and the DIY market.

If isolating a mains water feed in a multi-occupancy building, save time notifying and inconveniencing neighbours Using your inside stop valve should be easy and you should be able to operate the valve yourself. How to turn your water off using the inside stop valve Fitting Aladdin Autovents to radiators helps increase efficiency by eliminating gas and air from radiators automatically. Yes. Fitting the Autovent should reduce the need for corrosion inhibitors, but we do recommend their use because corrosion leads to further gas collecting in the radiators. 11) Can leak-stop products be used with the Autovent? On a Closed, pressurised system: After the air absorbed in the water has separated, the best early indicator of a leak is a drop in pressure of the system. An Autovent should, if anything, lead to a faster drop in pressure so an even earlier indication of a leak.The EasyFit Isolator is a full-flow valve which reduces flow by just 2% (@ 5 bar 30 lit/min) so flow will be 98% of the flowrate prior to fitting the valve. 4. Is the EasyFit Isolator guaranteed? A CenterRad Centerbrand radiator has a little well on the end of the roll top radiator facing end out from the radiator. This also uses the Micro Barlo. This valve needs no oring seal but seals on the cone end of the valve stem.

Unable to freeze flow of water, you can still install EasyFit to pipes with moving water, without the need to turn off the main external / internal service valve.It may take a few turns to turn the water on. It may also take a few minutes for the water to start running from your taps, as it will need to run through the pipes again.

We have two 6mm models. One is called the Micro Barlo which has an extended length thread and a conical tip. The other is the Micro 6mm which has a short 6mm thread. The EasyFit Isolator saves time cooling, draining down, refilling and returning to de-aerate. The bigger the system, the bigger the saving. No more freezing kits and the risk that an ice plug will fail.This guide should answer most questions asked regarding the Aladdin Autovents. 1) How do I find the correct sized Aladdin Autovent valve for my radiator? Yes, the EasyFit Isolator is designed to be fitted to live pipes hot up to 85°C or cold pipes. 2. When the EasyFit Isolator cuts into the pipe what happens to the piece of pipe which is removed?