EASYJOINT Paving COMP Black 12.5K

Product Information

Clean out the old jointing product completely to create the correct joint size (see information under the ‘Joints’ section). Do not use EASYJoint if the correct and fully clean joint size cannot be obtained. Frequently asked questions before using EASYJoint brush-in patio grout! Does EASYJoint brush-in patio grout need a permeable sub-base?

The use of water to wash and fill the joints between the paving is a breakthrough in jointing methodology. It assists the paving grout to compact into the joints so there is no need to ‘strike’ or ‘tool’ the joints unless you want a smooth finish. Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe. Additionally, ensure the project has a suitable “fall” to allow surface water to drain away. Base Mix Similarly, while EASYJoint remains wet, either via the application process or through rainfall, the curing process will be suspended. Prolonged periods of rain, or several intermittent showers will considerably extend the setting times. Again, this will not affect the final integrity of the product in any way provided water can drain easily away and so allow even curing throughout the joints (as previously explained) Why use EASYJoint? Maintain the Width of Joint Throughout Maintain at least a 3mm gap width throughout the depth of the paving material. Never have this type of paving butted together. See photograph.Bedding Mortars We supply a range of fast set, cement & resin based bedding mortars which are ideal for installing manhole covers, utility access covers, frames, highways ironwork and the bonding of granite, sandstone & porphyry setts, paving slabs, flags and bedding kerbs. Our range of high strength, bedding mortars mean roads, footpaths & highways can be reopened to traffic in as little as 40 minutes, meaning less disruption for the general public. Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the United States, UK, and in Europe. EASY Joint compound installation is easy. The compound is washed into the joint by using plenty of water before and during the application of EASY Joint. All you need is a hose, squeegee or broom and plenty of water. As the name implies, EASYJoint is easy to use – simply soak the paving with water before commencing and then simultaneously sweep and wash the jointing compound into the joints, letting the water take the strain.

Yes, you can pressure wash your patio, but you should use a fan tip nozzle and stay at least 6″ away, so it doesn’t damage the pavers. Both the bedding and sub-base must be permeable. When using a mortar bedding mix, this should be no stronger than 6:1 (sharp sand: cement). Be careful when using add-mixtures such as SBR or PVA as these can seriously affect the permeability of a mortar mix. In dry conditions and warm to moderate temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure very hard within a few days. Cold and wet conditions increase the setting time considerably. Freezing weather will cause the process to virtually cease and it can take many days for the joints to set hard. However EASYJoint will eventually set and the weather conditions will not have impaired its integrity in any way.

Less water is needed when applying EASYJoint to porcelain paving, as there is little risk of residue staining. You will find that a small amount of water, added to form it into a slurry, will make it easier to fill the joints properly. When applying to porcelain, to ensure an effective joint, the operator MUST strike the joint off, to compact the grout fully. Compaction forces out air and water which helps the joint harden faster. Continuously Wash the Paving. The hose operator should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of him/her so that the paving is always wet. This is particularly important in warm/hot weather conditions. Any sand that is moist or wet will not flow into joints tighter than 1/8th inch regardless of how fine it is. EASYJoint results in a strong paving joint that withstands the elements, and lasts for years, what’s more the solid joint eliminates weed growth! EASYJoint brush in paving grout can be used whatever the conditions are, it’s suitable to be used in wet and rainy weather. Sealing is particularly recommended for porous paving slabs and setts prior to laying and jointing with EASYJoint, to reduce the risk of staining or efflorescence. If sealer is applied after the patio has been laid, do not apply any type of sealer over the joint for at least a month after it has set hard. Only use a breathable sealer, otherwise EASY Joint may or may not remain permeable, and you may seal in any natural efflorescence passing through the stone. These natural salts will disperse over time. Can you apply EASYJoint in freezing conditions?

To further aid this, "point" or "strike" the joint; do not leave it textured. This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material. If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process.Freezing weather will increase the set time and will cause the process to virtually stop, it can take many days for the joints to set fully hard. However EASYJoint will eventually set and the weather conditions will not have impaired its integrity in any way. The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methods Any dates specified by Building & DIY Supplies for delivery of the Goods are intended to be an estimate and time for delivery shall not be made of the essence by notice. If no dates are so specified, delivery shall be within a reasonable time.

Wet the Paving. Thoroughly soak the patio or paved area to be jointed with lots of water using a hose. The paving must be absolutely saturated before starting and remain soaked throughout the application process ‘the wetter, the better.’ We strongly recommend not shortcutting this process, particularly when working with absorbent or sensitive materials such as Sandstone, Granite and Limestone. Highly absorbent and porous stone will require sealing, 2-3 days prior to laying, on its top surface and four edges.Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings. Freezing conditions are not always problematic for EASYJoint, however the volume of water used during the application process can potentially freeze. In this instance the particles within the grout mix won’t settle into the joints evenly due to the presence of ice and potentially lead to longer term problems. In wet weather conditions, the curing process will be suspended. Prolonged periods of rain, or several intermittent showers will considerably extend the setting times. Again, this will not affect the final integrity of the product in any way provided water can drain easily away and so allow even curing throughout the joints (as previously explained). Work cleanly, clearing both the sand grains and the binding oil from the surface as you go. Keep washing until the “rainbow effect” oily water is no longer evident.