Stanley CLAW BAR 10IN

Product Information

Step 3: Do not use a crowbar to try to twist the boards apart. You will make marks on them, and some will splinter. Instead, put the pallet on a flat surface like a floor, and place a piece of wood under the board, just next to the stringer you want to push off. Then with another piece of wood, you tap a few times on the stringer from above, and it will come off easily, without breaking the stringer or the boards it was attached to. There will be no nails in the stringers and only short nails on the boards. You can remove them easily with a small hammer and a prybar. Milwaukee M18 Fuel Sawzall Brushless Cordless Reciprocating Saw - No Charger, No Battery, Bare Tool...

Pry Bars | Lever Bars | Toolstation Pry Bars | Lever Bars | Toolstation

The choice of removing or keeping the nails depends on you! Keeping the nails adds a certain charm and specific rustic characteristic to the pallet craft you’re making. However, sometimes you’re making a very finished piece where nails won’t add to the appeal. It’s strictly up to you. We hope these methods will help you to disassemble your pallets, particularly for those who don’t own a reciprocating saw (Sawzall) or have one at their disposal. Do you have another method to share? Share it with our readers through the comments and if you have some videos or tutorials, do not hesitate to send them to us, and we will update this article accordingly. What to do with the nails? You have two options depending on the finish you want to make to your project. Remove the nails This method is one of our favorite methods; it didn’t require any pallet disassembly tool, only a hammer and an old wood plank (from another pallet, for example) that will be used to absorb all the hammer hits and impacts. Here are the step-by-step instructions:DEWALT 20V MAX Reciprocating Saw, 3,000 Strokes Per Minute, Variable Speed Trigger, Bare Tool Only... No matter what you do, take care when working with pallets. Don’t forget that the nails are in place if you leave them – they could cause significant damage to your tools – and to YOU. ALWAYS wear protective gear, especially goggles or safety glasses when working with pallets. DEWALT Reciprocating Saw, 12 Amp, 2,900 RPM, 4-Position Blade Clamp, Variable Speed Trigger, Corded...