Kanto YU4MB Powered Speakers with Bluetooth and Built-in Phono Preamp | Auto Standby and Startup | Remote Included | 140W Peak Power | Pair | Matte Black

Product Information

We recommend you read all instructions carefully before using the system and keep them for future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or use of this product. When the volume is high, this system can produce noise levels that could permanently damage your hearing. YU4 is a self-powered speaker system. Do not connect the speaker terminals to the speaker intputs of a stereo amplifier. Damage may occur. Use only the power cord provided with the speakers. Connecting Audio Sources Verify that the volume of the speaker is not at its minimum level. Turn the volume up using the knob on the front or the volume controls on the remote. The Edifier R1280DB is a Bluetooth 5.0 speaker made for audiophiles. It comes with high-end components, the latest Bluetooth version, and plenty of inputs (optical audio, coaxial and line-in inputs). You can connect to different inputs simultaneously and use the source feature to swap inputs. Prosonic BT30 Active Bluetooth Bookshelf Speaker

We recommend keeping a maximum distance of 10 meters between the speaker and your device. The best signal fidelity is within this range. Set the volume of the source to its highest level. Low source volume can negatively affect dynamic range. The YU4 powered speaker system is designed for either bookshelf or stand mounting. The stands should be of rigid construction, between 26" to 32" high. We recommend the Kanto SP26 speaker stands to go with your YU4.The YU4 is designed to provide the best quality sound with its enhanced drivers and dome tweeters. The cabinets are handcrafted to make sure you get the best results each time. It connects to almost all audio equipment including a vinyl record player and it can also connect wirelessly via Bluetooth to any smartphone, tablet, or PC.

When using AUX with a PC, reduce the volume of the speakers and increase the PC volume. Also try connecting the speaker ground terminal to the PC chassis ground if noise persists. Controls are limited and may take time to learn. We recommend using the remote control instead of the knob. Adjacent to it is an LED light that tells you that the speakers are powered on. Design – 4.8 out of 5 If your turntable does not have a built in Phono Pre-Amp, use the "Phono" setting on the Phono switch. One of the predecessors of the YU4 is the YU, a Bluetooth 4.2-powered bookshelf speaker system that offers impressive sound thanks to its silk-dome tweeter and Kevlar drivers. Kanto YU4 has external dimensions of (Height x Width x Depth) 8.7 x 5.5 x 7.5inch (220.0 x 140.0 x 190.0mm ).The space between the two speakers and the distance from the listener is important. If the speakers are positioned too close or too far apart, stereo imaging will not be fully developed. One of the natural alternative to the Kanto YU4 is the YU6 which is located one step higher in Kanto's Powered Bookshelf selection.