Ruida Controller 400x400mm Working Area 50W CO2 Engraving Cutting Machine

Product Information

Y Frame over size Work Paused - The design is too large or too close to the front or rear edge of the bed. Try centering the design on the bed or reducing the size of the design.

RDWorks is a software program used to create and control the operation of laser cutting and engraving machines. It is commonly used in the fields of woodworking, metalworking, and manufacturing. Some of the features and specifications of RDWorks include:When it is indicated whether the pulse signal of motor driver is the valid rising edge or the valid falling edge, it will be subject to the pulse signal inputted from the minus end of side OC diode. A DSP laser will have homing switches - one on each axis. They might be physical lever-type micro switches, optical beam-break switches, or inductive proximity sensors. Locate the switch at the end of the X axis, and the one for the Y axis. Note that the Ruida homes using the X- and Y- limit switches. I’ve attached a video of what I’m talking about and pictures of the controller with the lights on but only before the real startup sequence happens otherwise it starts banging. When the laser is a glass tube, if the used laser is outputted in the low-level form, this pin will be connected with the laser power enable end and used to control the ON/Off of laser. X Frame over size Work Paused - The design is too large or too close to the left or right edge of the bed. Try centering the design on the bed or reducing the size of the design.

Cover Opening Protection: If enabled this item, the controller must connect the protection wiring, otherwise, the machine will not work. there are a set of legends here which are numbered one to 15, which tells you exactly what these LEDs do. The input port of water protector for the first laser power source. When the water protector 1 is enabled, the controller will detect the input port of water protector 1. If this port is of low level, it will be deemed normal; if this port is of high level, the controller will forcibly close the laser to suspend the work in progress and the system will warn. If the water protector 1 is not enabled, the controller will not detect the input port of water protector 1 and so the water protector 1 can be unconnected.Squares are rectangles and my circles are ovals - Steps per rotation for your machine must be adjusted for designs to be properly sized. Each machine and rotary is different. Below are steps to help calculate steps per rotation.

The first section is general configuration, and then there are settings that are specific to each axis, followed by a Laser section, for configuration specific to the laser type. Homing, Directions, and Travel ¶Ruida controllers are a popular choice among laser enthusiasts and professionals due to their reliability and ease of use. The Ruida platform offers advanced features, such as support for various laser engraving and cutting applications, customizable laser control, and compatibility with multiple laser types. Additionally, the Ruida DSP has a well-established user community and support system, making it a solid option for building a CO2 laser controller. Scope: it means the farthest distance that the motion axle can move, which is determined in accordance with the actual condition of the machine. After-feeding delay: settable at 0~9.9s. It can facilitate the feeding device’s delaying vibrated after moving to the correct position and waiting for the 2nd work after the feeding axle stands still completely.