TAMIYA 81716 - Mini Acrylic Paint Matt Aluminium 10ml XF-16

Product Information

For better paint brushing results use Tamiya Paint Retarder (item 87114) for a smoother brushstroke free finish. Tamiya Acrylic Paints are made from water-soluble acrylic resins and are excellent for either brush or spray painting.

Tamiya Mini XF-16 Flat Aluminium Acrylic Paint 10ml Bottle

Thinner amount and type - I wasn't thinning the XF-19 enough. Your 4:6 paint to thinner ratio contained much more thinner (and I hadn't tried the Tamiya yellow-top stuff, I forgot all about it) than I had been using. The parts of a model must be cleaned before applying the paint. This can be done using a suitable cleaning product, but you can also sand the parts or apply a primer. The best solution is to apply a primer as this will provide better adhesion to the paint layers you will apply later. If there are any bumps or imperfections of any kind after cleaning with the special cleaner or after priming, you can use a fine-grit sandpaper (2000 grit or above) to remove them. Note that the etchings will remain visible after priming with a spray gun. Paint selection Dimensions Embroidery, Easymodel, EK Success Tools, Eurographcs, D-Toys, Eduard, Gluelines, Heller, Be aware that paints take varying amounts of time to dry. Do not touch the pieces you have just painted, you will leave traces that should be removed by sanding. Also, don’t try to apply a new coat of paint until the previous coat is completely dry. These two modifications greatly improved the XF-19's finish. It's probably not a paint I'd use on a large external panel, but for general parts that I need to paint silver, it's an acceptable option.Well, magical is probably putting it a bit strongly, especially if you're looking to achieve a highly-polished natural metal finish (there are better options for that). But, it's great for giving a more restrained finish, either as weathered aluminium, or to represent painted aluminium lacquer (RAF High Speed Silver, for example), or even silver dope finishes. It's also very easy to apply right out of the can, and as you mentioned, it can be decanted for airbrushing. It dries fast and tough, and can be masked over with ease. The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish. I know all this is not really answering your original question, so my apologies for that. But if you're looking for an alternative as a workhorse silver paint, I can't recommend it highly enough.

Tamiya Color Cross-Reference - Cybermodeler Online Tamiya Color Cross-Reference - Cybermodeler Online

I'm having the worst time trying to get Tamiya's XF-16 Flat Aluminum to spray smoothly and am hoping for some suggestions from the experts here. Glad we were able to help. I've found that when shooting acrylics, thinner is so much better and working with low air pressure helps a tremendous amount. The Tamiya Mini XF-16 Flat Aluminum 10ml Acrylic Acrylic Paints come in 10ml bottles and are water-soluble and non-toxic. They are suitable to paint plastic model kits and come in three finishes, gloss, flat and translucent. The Tamiya Acrylic Paint range can be brushed straight from the tub, or thinned to be used in an airbrush. But regarding the Alclad dull aluminium, all i can say is that it's VERY dull. Actually it's perfect to paint engines as it really looks like cast aluminium, but for an airframe i doubt it would really match a nice "silver" finish, even if you want something matt. I think a "standard" aluminium finish coated with matt varnish would be better.

MOTOR/ESC COMBOS

When airbrushing be certain to use any of the following Tamiya thinners: Items-81020, 81030, 81040, 81520, 87077.

Xf-16 Flat Aluminum 23Ml Bottle / Tamiya USA Acrylic Xf-16 Flat Aluminum 23Ml Bottle / Tamiya USA

Items 81521 and 81021 (Tamiya X-21 Flat Base) can be used as a flattening agent on Tamiya Gloss bottle paints. Simply add any X-gloss color then add flat base. Mixing ratio: 1:1 For thinning, I use Mr. Color Thinner, but the levelling variety is just as applicable, as is Tamiya's own lacquer thinner (they're quite similar I believe). I find generic hardware-store lacquer thinner too harsh for this usage, but they vary so much that you might still find some value in testing it. XF-16 is probably the grainiest metallic paint that Tamiya makes so it's probably more the paint than your technique. No matter what I've tried, the results always end up with an uneven, grainy, and overall poor appearance.

Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene ... I cant answer to your question as i've never tried to spray XF-16 (but i'm interested as i have several between the war aircraft in project which might need some XF-16 in the paint mix). UK Importers ,wholesalers and distributors of plastic model kits, jisaw puzzles, board games, embroidery, paints, tools and glues. Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or airbrushing. These paints can be used on styrene resins, Styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.