Joined in 2023 
82 
63 About this deal
Connect the display devices: Connect an HDMI cable between the first HDMI output on the splitter and your first display device (e.g., projector), then run another HDMI cable between the second output of the splitter and your second display device (e.g., television). A typical HDMI splitter has one input and multiple outputs, such as 1×2, 1×3, etc. Connect the HDMI cable from your source device (like a gaming console, Blu-ray player, or streaming device) to the splitter’s input. Then, connect the HDMI cables from the output ports of the splitter to your display devices (like TVs, monitors, or projectors). Powered or passive: Passive splitters don’t require a power source, while powered ones need a separate connection. Although passive splitters may seem attractive, they may perform less well than powered models and could introduce latency.
Compatible with various audio formats, such as Dolby TrueHD, DTS-HD, 7.1-channel LPCM, DTS, Dolby AC3, and DSD For starters, splitter-type transmitters grab a signal and duplicate it. After that, the twin signals from the splitter go to several displaying devices simultaneously. HDMI switches, on the contrary, can transfer the signal from one or more devices to only one screen. The SGEYR SG501A is one of the few models that act as both a switch and a splitter for HDMI interfaces at the same time. HDMI Version Support: Different HDMI versions support various features (e.g., HDMI 1.4 offers Audio Return Channel, and HDMI 2.0 enables 4K Ultra HD video resolutions). Make sure the splitter supports the HDMI version that meets your requirements.The CYHI514 from mrocioa is a simple and affordable HDMI splitter that features a few aces up its sleeve, making it an attractive option for owners of several digital monitors or TVs. When she’s not writing, you can usually find Sarah baking something delicious, hiking up a mountain, or playing video games. Alternatively, this OREI HDMI splitter is also capable of sending an 8K@60Hz signal, but it doesn’t support downscaling. This means all of your output displays need to support 8K@60Hz if you want to utilize this high resolution and refresh rate combo. If one of your output displays (or your input device) only supports 4K@60Hz, the signal sent to both displays will be the lower 4K@60Hz option. Secondly, it’s a fast and stable transmission of data - even with all three ports occupied, this little aluminium box will deliver up to 10.2 Gbps bandwidth, which is simply amazing. What's not as amazing though is that if all three ports are used simultaneously, the appliance might get noticeably hot. Regardless, it doesn't affect its performance. Connect your source device: Run an HDMI cable between the HDMI output of your source device (e.g., laptop) and the HDMI input of the splitter. If your device doesn’t have an HDMI output, you may need to use an adapter to convert the connection to HDMI.
The forward compatibility is another story, though, so there is still a couple of pitfalls you’d want to avoid here. Some devices may not be compatible due to the HDMI version differences. Helpfully, that info can also be found in the manuals. So don't forget to compare the supported formats. Most HDMI switches support basic audio signals like LPCM, Dolby Digital and Dolby Digital Plus, Dolby True HD, DVD and Blu-ray Audio, DTS-HD, Dolby Atmos, among others. As for the maximum resolution, it is only limited by the bandwidth that a given model supports. This can range from FullHD all the way up to 2K, 4K, and 8K formats. As of HDMI 2.1-powered splitters, the maximum bitrate is capped at 48 Gbit/s, which allows utilising a single splitter to successfully stream the digital signal on multiple devices with little to no loss of output quality. The older, 2.0 version of the HDMI (UHD) can handle up to 18.0 Gbit/s, which should be more than enough to handle 2 to 3 4K (60Hz) monitors or TVs at the same time. ControlsKeep in mind splitters and switches are different. While an HDMI splitter distributes a single source to multiple devices, an HDMI switch allows you to connect various sources to a single display device and switch between them. Understanding the difference between an HDMI splitter and an HDMI switch is essential to ensure you buy the correct device. When I look for these online, what strikes me is how confusing it can be. Gaming:extend your gaming setup into two screens or multiple rooms by displaying your console gameplay on TVs in the living room, bedroom, and basement. With a splitter, the whole family can enjoy multiplayer games without being cramped together. Play a gaming session on two screens with a splitter Party or Sports Bar:transform your home into a dance club or sports bar by showing music videos, concerts, or the big game on every screen at your next party. With content mirrored on all your smart TVs, projectors and monitors, your HDMI splitter can turn a casual get-together into an immersive audio-visual extravaganza!
As for naming, a 1-in/4-out splitter is often called a 1×4, with one input and four outputs. Similarly, a 3-in/1-out switch is referred to as a 3×1, comprising three inputs and one output. HDMI Splitter vs. Switch HDMI splitter: A splitter takes the signal from one source device and simultaneously sends the HDMI signal to multiple devices. For instance, you might use a splitter when you want to watch a movie on two televisions, like one in the living room and another in the kitchen. Though she is still writing for Android Authority, she went on to start writing for MakeUseOf, KOINO IT Solutions, and, of course, Review Geek.
Products at a Glance
The terms splitter and switch appear as if they are interchangeable, even though they do different things. Remember this:
The switch/splitter is the HDMI 1.4 version and can transmit video in 4K Ultra HD quality; the selection of supported audio formats is also fairly good, it includes Dolby TrueHD, DTS-HD Master Audio, and LPCM, among others. The model pictured here has one input and four outputs. Therefore, it’s a 1×4 (pronounced one by four): 1-In/4-Out HDMI SplitterWhen selecting an HDMI splitter, it’s essential to consider specific factors to ensure it meets your needs. Here are some key aspects to take into account:
Great Deal 
New Comment