Joined in 2023 
82 
63 About this deal
Fitting a toilet seat using top fixings is fairly similar to a bottom fix seat, with the difference of exactly where the fixings are located. Follow the steps below to fit one: Step 1 – Insert Top Fixing Plugs The method is to fit the rubber grommet into the pan holes and tighten the screw that engages with the nut and as one tightens, the nut is drawn up by the screwing action that expands the rubber grommet, making it tighten within the hole in the pan. There are quite a few different shapes of toilet around today and many different types of toilet seat to match. Although most seats and fittings are adjustable so that they will fit the most common toilet bowl shapes, you still need to ensure it’s the right size. The top fixing method for toilet seats tends to be more modern and due to this is generally featured on modern toilet seats.
Fast Fit L SHAPE/SHAPED HEAVY DUTY STAINLESS STEEL TOILET
Once the nuts holding the seat in place are removed you can simply lift it away and free from the pan. For most top fixing toilet seats, the seat and hinges are supplied separately and fitted as described above, however with a few kits, the hinges come fitted to the seat. Once finished you should also clean any and all tools that you have used. Tools Needed to Change a Toilet Seat Fixing (domed, stainless washers, fixing nut and bolt): Connects to the hinge plate and fixes everything to the toilet pan In pretty much all cases your toilet will be shaped to fit a particular type of seat so replacing a toilet seat will have to be done on a like-for-like basis so that you can be sure that it fits correctly.Finally, slip the vinyl or plastic washer over the stud and slide it up to the hinge plate. This sits between the hinge plate and pan and protects the pan from scratching. Step 2 – Adjust the Hinges
toilet seat spares. Hinges. Bolts. Fittings Packs etc. WC toilet seat spares. Hinges. Bolts. Fittings Packs etc.
Once it’s out of the way you can then thoroughly clean the whole area before refitting your new seat. Fitting a New Toilet Seat This is a very good and well thought out solution for this eventuality and saves having to withdraw the pan from the wall, where re-sealing is difficult. If you are thinking of changing your toilet from a close coupled to a low level toilet, take a look at the project we have on this, the old seat may not fit the new loo. D-Shape: These seats tend to be modern so suit modern bathrooms and toilets and they are a little larger than more traditional toilets The fixing itself normally works in the same way as a wall plug. A plastic sleeve pushes down into the hole in the pan and then a screw or bolt screws down in. As it screws in the sleeve expands and grips tightly in the hole holding it firmly in place.Toilet seat fixings tend to be slightly different between manufacturers and due to this there are quite a few, however despite this they can all be broken into 2 different types; bottom fixing and top fixing. Bottom Fixing Toilet Seats One type of plastic toilet seat that deserves a special mention is the resin seat. This is due to the fact that they differ slightly in that resin is slightly tougher and harder wearing than standard plastic and, apart from a massive range of different colours and styles, they can also have images and objects inset into them. This bar has 2 blind holes and the method is to locate the spigots into the blind holes which also incorporate a tiny grub screw with an Allen head. A tiny Allen key is required to secure the grub screws to the spigot. The final job, after a few days, is to retighten the fixing nuts once more. As any rubber and plastic compresses it can create a bit of movement and play so this needs to be taken up by tightening the nuts a little further.
a Toilet Seat | DIY Doctor How to Fit or Replace a Toilet Seat | DIY Doctor
The fixing bolt or washer has failed – this sometimes occurs with cheaper seats with plastic fixing bolts. They can be tightened but typically it will fail again. Best solution is to replace it The bottom fixing is the traditional way to fix a toilet seat to a toilet and because of this they are the most common. However, once adjusted, hold the hinge so it doesn’t move, pop the screw down in and screw it up tight and then repeat for the other side. Step 3 – Fit Seat in Place For the purposes of this guide we are going to run through fitting a seat using bottom fixing bolts. Step 1 – Fit Studs to Hinge Plate There are 4 standard types of toilet seat currently available and these are pointed nose, rounded nose, D-shape and square and depending on the type and age of toilet you have will depend on the type of seat that’s used.If your studs and wingnut or nut are plastic then, as we have said, don’t over tighten them as you can easily strip them. Where metal nuts or wing nuts are used, depending on how old they are they might be very corroded and can be a nightmare to remove. If this is the case, soak them in WD40 or a similar easing fluid. Altering the location of the fixing bolt in the hinge plate can move the position of the hinge forward
Great Deal 
New Comment