Joined in 2023 
82 
63 About this deal
Defines multi-lane operation for new USB 3.2 hosts and devices, allowing for up to two lanes of 10Gbps operation to realize a 20Gbps data transfer rate, without sacrificing cable length
If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.Over-voltage protection, effectively preventing other high-voltage power inputs from damaging the connected devices Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great, fully featured hub that’s still affordable and – most importantly – it just works. If you have a USB 3.2 Gen 2 port and want to take advantage of its 10 Gbps speed, look for a cable that supports 10 Gbps (it could be USB 3.2 Gen 2 or USB 3.1 Gen 2) and a peripheral that does the same. If you want to get 20 Gbps speeds, all three pieces: the port, the peripheral and the cable, must support that speed. What Can I Do with USB 3.2 or USB 3.1? Key specs – Upstream connection: 1x USB-C; USB ports: 3x Thunderbolt 4 USB-C 3x USB-A 3.2 Gen 2; Other ports: Gigabit Ethernet, SD Card, 3.5mm audio; Power:135W power adapter; Maximum power load: 90W per port; Dimensions: 190 x 75 x 27mm; Weight: 338g; Warranty: 12 months In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried).
Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD. In 2013, USB-IF announced that it was taking USB up to 10 Gbps and, in doing so, changed the version number for all USB 3.x products. So USB 3.0 (5 Gbps) became USB 3.1 Gen 1 and the new, 10 Gbps speed became USB 3.1 Gen 2.USB Type-C has plenty of perks, and with one of the USB Type-C hubs you might be considering getting, you'll be able to copy files at USB 3.1 speeds, deliver enough power to charge a laptop, or use Alt Mode to send other types of data using DisplayPort or Thunderbolt 3connections. The 20 Gbps speed is called USB 3.2 Gen 2x2, because it uses two 10 Gbps lanes to give you the 20 Gbps speed. Would it have been less confusing if they called it USB 3.2 Gen 3? Who knows?
If you're using a USB hub, you'll want at least a 5 Gbps connection, because all of the peripherals connected to that hub will be sharing that bandwidth. So, if you have a mouse, a keyboard and a webcam all plugged into the same hub, they will definitely need at least the 5 Gbps that USB 3.2 Gen 1 / USB 3.1 Gen 1 provides. All MacBooks and many of the best Ultrabooks come with only USB-C ports, and just a couple of them. That’s why there are so many portable USB hubs that connect to a computer via a built-in USB-C cable and then provide a few Type-A ports, along with some extra goodies such as an HDMI out or a card reader. Anker’s PowerExpand 4-in-1 USB-C hub has one whiz-bang feature we haven’t seen anywhere else, and that’s a built-in 256GB SSD. You can also get other versions of Inatek's USB hub, the HB2025 for example, that connect to your computer via USB-C, which is a more common interface for 10 Gbps connections, particularly on laptops. We really wish one of these hubs had a mix of USB-C and USB Type-A downstream ports, but they are all Type-A downstream. At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once.Output ports: Make sure you get enough ports to attach the number of devices you’re likely to need. Most USB hubs have at least 3, more often 4, output ports, but at your desk, you may need a lot more than that. Also, consider whether you are attaching any USB-C devices (most output ports on hubs are Type-A). Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable. The different USB 3.x version numbers exist purely because the number has been iterated with each speed advancement. In 2008, the USB 3.0 standard launched, bringing USB up to 5 Gbps, a huge leap from the 480 Mbps speed of USB 2.0, and for many years that was as fast as USB could go. In fact, even today, the vast majority of USB ports and products don't go beyond 5 Gbps nor do you need them to. Many peripherals don't even need to go beyond USB 2.0. Most importantly, the ssk usb hub is designed for small size, is used for transfer rate, It is lightweight and has a compact design. Power pass-through: All the hubs we considered also have a USB-C port that allows you to plug in your charger without taking up a second port on the computer itself (if it even has a second port). USB-C supports power at up to 100 watts, while laptops take anywhere from 30 watts (for a small machine such as the MacBook Air) to 45 watts (for many midrange laptops, as Chromebooks tend to be) to 97 watts (for the 16-inch MacBook Pro). We’ve found the Power tab in macOS’s System Report to accurately report the wattage of the power source, and in our tests we compared the figures stated there against what each company advertised.
Take some of the claims made by some manufacturers with a pinch of salt. We tested a couple of hubs that promised high-end features but failed to deliver during testing. For example, they might promise 4K at 60Hz, but you might find that this only works on specific laptops and displays. Upstream connection (Type-A or Type-C?): USB hubs have multiple downstream ports to connect to your devices but only one upstream connector, which could be a port but is often a built-in wire that connects to your computer. Many laptops, including a lot of the best Ultrabooks, only have USB-C ports, so your hub's upstream connector would have to be Type-C. This UGreen unit is another basic USB hub, with four USB 3.0/3.1 Gen 1 ports connecting through a single USB-A connection. Disappointingly, what looks like an aluminium casing turns out to be plastic, which feels a little creaky in comparison to some models, but it’s robust enough for daily desktop or mobile use. The big advantage this one has over similarly priced rivals is a 5V micro-USB input, meaning it can charge devices while in use (without any fast charge support) and run one or more USB SSDs or HDDs – we tried it with one of each without any issues. The only downside? You’ll need to supply your own charger and cable, but it’s hard to grumble at this price. HDMI: A hub can be very useful at a desk, especially if you want to hook your computer up to an external monitor. We connected each of the hubs via HDMI to a Philips 272P7VUBNB/27 monitor with the resolution set to 4K, and we used the Blur Busters UFO Motion Test to confirm the refresh rate. Most hubs support only a 30 Hz refresh rate (the image refreshes 30 times a second) at 4K resolution, but a handful now support a smoother 60 Hz rate, and we prefer those hubs that do.The USB 3.2 specification defines multi-lane operation for new USB 3.2 hosts and devices, allowing for up to two lanes of 10Gbps operation to realize a 20Gbps data transfer rate. While USB hosts and devices were originally designed as single-lane solutions, USB Type-C ®cables were designed from the outset to support multi-lane operation to ensure a path for scalable performance. Still, for Windows laptops, MacBook, and Chromebook users who only need a couple of reliable ports, this makes it onto our list of best USB-C hubs. Finally, and perhaps most importantly, external SSDs and the best hard drives need at least USB 3.2 / 3.1 / 3.0 speeds. The fastest external SSDs or SSD enclosures can operate at USB 3.2 Gen 2 (10 Gbps) or USB 3.2 Gen 2x2 (20 Gbps), though the 10 Gbps speed is far more common and cheaper. Essentially, it's a tiny, super-fast connector that many of the best laptops today have a connector for, with the only downside being that USB A or USB B connectors can't be used with a USB Type-C port (that's where a USB Type-C hub comes in handy).
Great Deal 
New Comment