Aquasteel Rust Converter and Primer 1 Litre

Product Information

Steelwork must be primed with an anti-corrosion primer suited to the intended environment of the building

Should not be applied to cold metal at or below the dew point or hot metal above 40 °C . The coating gives excellent protection at temperatures between 5°C and 50°C during continuous use. Aquasteel WB+ Finish is available as a water based acrylic eggshell or solvent based gloss finish. Both Eggshell, Gloss and Matt finishes are available in nearly all BS, RAL and NCS colours.

£43.00

However, new and improved AquaSteel WB+ intumescent coating combines the ability to protect all standard steel sizes and profiles for both 1/2 hour and 1 hour fire resistance in a single product. Zeroflame Aquasteel WB+ is a white thin-film waterborne intumescent coating with a new and improved formula designed to provide 30 and 60 minutes fire resistance on standard structural steel members in internal environments. It provides an easier and more efficient alternative to cladding steel members in plasterboard. Principe, Lawrence M. (2013). The Secrets of Alchemy. Chicago: University of Chicago Press. ISBN 978-0-226-68295-2. pp. 149-153.

Multhauf, Robert P. (1966). The Origins of Chemistry. London: Oldbourne. p. 208, note 29; cf. p. 142, note 79.

Credit limit exceeded

Stir well before use. Apply between one and 3 coats. For salt-sea applications or totally immersed (below the water-line applications always use 3 coats. For badly corroded surfaces the coverage will be reduced accordingly. If a decorative finish is required, the product can be overcoated with Zeroflame Aquasteel WB+ Finish which has a wide range of colour options (RAL, BS & NCS) IMPORTANT – high peaks must be adequately covered by Aquasteel. Alkali, grease, oil, salt and chemicals must be removed with detergent water, wash and then rinse surface with cold clean water. We recommend Aquawash in these cases. Paintwork blistered by rust must be scraped down to the hard rust surface. DO NOT REMOVE ALL TRACES OF RUST. RUST IS NECESSARY FOR THE COMPLETE REACTION OF AQUASTEEL TO TAKE PLACE. AQUASTEEL MAY BE APPLIED TO SLIGHTLY DAMP RUSTED SURFACES. Work areas of deep pitting well using brush.