Rust-Oleum AMZ0012 Chalky Finish Furniture Paint - Antique White - 750ml

Product Information

coat over the affected areas, leave to dry, and then sand again until the desired finish is achieved. Once you are happy with the outcome it is time to apply Rust-Oleum Furniture Finishing Wax. This protects the paint finish and is really easy to apply. Just simply take an old rag or paint brush and work the wax into the paint work a little at a time. Leave this to dry for 10 minutes then buff the surface with a clean, dry cloth to remove any excess wax. From here this will then just take 15 minutes to dry fully. Add any finishing touches to your item and the look will be complete.

Simply wipe down your furniture before applying a coat of the paint on top of bare wood, existing paint or varnish.

Similar products

Create a distressed look by applying two coats in contrasting colours then sanding/ scouring when dry. Water based, no priming or sanding necessary on most surfaces. Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood, previously painted or varnished surfaces should be sanded before painting. Ensure new concrete is sound, fully cured and free from laitance. Application: Stir thoroughly before use. Use only when thetemperature is between 10-32oC and humidity is below 85% to ensureproper drying. Apply by brush or short nap mohair roller. If applying bybrush, apply evenly following the grain of the wood. Limitations: Coverage may vary depending upon method and rate ofapplication and porosity of surface. Drying times are based on warm(20oC), dry application conditions with good ventilation. Lowertemperatures and higher humidity will prolong the drying times. Notrecommended for outdoor use. Whilst every effort is made to ensurethe accuracy of colour, due to limitations of the print processcolour/finish shown is for guidance only. To ensure paint suitability teston a small inconspicuous area first. Limitations: For interior use only. Temperature at time of theapplication and during drying should be greater than 5°C. To ensurepaint suitability for your particular project test on a small inconspicuousarea first.

If you are painting a chair, a brush is the best option to get into all parts. Start at the top and work your way down. Add a small screw in the bottom of each leg to keep it just above the ground to help paint the legs. Alternatively, turn the chair upside down, paint the legs, wait for them to dry, turn over and finish. Make sure to put down dust sheets or paper.Stain Removal: Remove any stains promptly, most common stainse.g. dirt, ketchup, mustard, tea, coffee can be removed using a softcloth and warm soapy water. Do not use scourers or abrasive cleanersas these may mark the paint finish.