Replacement Motion Security Floodlight Sensor, 90~250V LED Outdoor Security Infrared PIR Human Body Motion Sensor Detector Inductor Switch for LED Floodlight and Loads Light

Product Information

Worse comes to worst, the sensor component can be purchased, as they are pretty standard and screw into a "1/2" trade size" thread. That said, moving a sensor isn’t without its risks – as if you want to keep the rest of your alarm working, you’ll need to keep power to the system – meaning that there’ll still be 12V running through the wires, which you need to make sure you don’t short – otherwise this could affect the rest of your alarm system. Time delay: 10 seconds to 7 minutes • Ambient light: 3-2,000 Lux (adjustable) • Installation height: 1. So, for example, people and animals can be detected, as also other things that create heat, such as cars, motorbikes, etc.

Stylish LED wall light with PIR motion sensor and solar panel • Light source: 10x SMD2835 LEDs • Automatic 30% of maximum lighting when ambient light drops below 30 lux • Full illumination for 30 seconds when motion detector triggered, then drops to 30%. We have infrared 360-degree sensors, strip light sensors, IPL65, small, ceiling sensors and wall sensors, all of which come with a minimum two-year warranty.when you disconnect the wires from the sensor if you have a tamper zone wired in, then this will set the alarm off. For a complete home security set up that can be accessed on the go, we have a selection of indoor and outdoor smart security technology from brands including Yale, Nest and Netatmo. Light ON times adjustable from 5 seconds to 18 minutes • Scrolling red LED System Live on the front of the PIR acts as advance deterrent • Adjustable light level control • Manual ON/OFF override • Optional holiday mode between 1 and 8 hours • Direct mou.

The Culina Recessed Round Satin Nickel LED Decking Light has a real dual purpose as both a deck light outside or a plinth light in the Kitchen. Electronic, micro-processor controlled motion detector with 360° anti-creep for gapless monitoring • Adjustable spherical head • Detection area can be altered by blinds, which are included • Blinds can be clipped-on and moved to stop unwanted detection,.Supplied with DIP switch • Detection distance: 3m/6m (selectable) • Detection angle: 120°/360° • Time delay: 5s, 30s, 1min. Slimline sensor head design • 360° Area of detection • 8m Detection range for motion and 4m for presence detecti. Ideal for public buildings, warehouses, toilets or areas where lights are required when occupied • The switch will allow fans or lights operate up to a point where no moving body heat is detected • On/Off Switch • Fits standard 1 gang box (25mm depth re.