M.2 SSD Screw SOLID STATE HDD MOUNTING SCREWS FOR M2 Card MICRO SSD SCREWS 12 (Samsung)

Product Information

I had the same lame issue! My motherboard came with the spacer but not the screw, and screw flight was so small I couldn't find any screw that fitted. Our Dell Optiplex PCs at work have been using a plastic "clip" to hold the SSDs for some time I think. Looks like this... Hopefully, that explained everything you wanted to know about what you can do if you lose an M.2 screw! Also, stupid question, on mine the screw was already in place as well, isn't yours already on the mobo ? My M2 data is just big enofe to fit in all the wey, I dont have a screw feature but a slide one (older models), where after you insert the M2 you move it all the wey and then slide the plastic ,,screw” thingy to hold it in place, well its too big and it hits the ,,screw” so my only posibility is to leave it be at 30° angle, you cant unscrew it or replace the thing, so I am left with 2 choices: 1st – leave it be

size of screw to get for m.2 ssd : r/buildapc - Reddit size of screw to get for m.2 ssd : r/buildapc - Reddit

I do not know if it is standardised or if there are different versions of the screws/standoffs. I can send you pictures and measurements of mine but I do not run the exact same mobo. The ideal screw size for an M2 SSD is a screw with dimensions 2x 3 mm. This means that the M2’s external diameter is 2 mm. However, it’s not always exact 2; it can sometimes be between 1.9 and 2 mm because of manufacturing tolerances. Can You Use Any Screw for M2? M2 screws are typically used in the manufacture of small items of electrical equipment, laptops, cameras and mobile phones. The “M” designation for metric screws indicates the outer diameter of the screw in millimetres, so for an M2 screw, the outer diameter is 2mm. However, in practice the actual diameter might be between 1.9mm-2mm due to manufacturing tolerances. SSDs typically don’t include the screws for mounting the drive, but they are usually included with the motherboard. Some motherboards don’t have standoffs. Some do, and you need to install them. Some come with them pre-installed. And so on.

Typical Apple Innovation…

The ideal size for the M2 screw is 2 x3 mm or 2x 8 mm, depending on the motherboard you have, but you can use any regular screw if it has the correct measurements. Get some actual M.2 screws and do it right. But in the meantime… Look for Old Small Screws in Your Home Some local hardware stores carry them as they are widely used in other things too, not just computers.

Akuoly PC Screws M.2 SSD NVMe Mounting Screws Set for Msi

Usually, the motherboard also includes a stand-off. So if you’re missing SSD mounting screws and are looking for a replacement, remember that any random screw might not be able to fit in the stand-off. – Do All Manufacturers Include the Screw? If you can’t find a dedicated M2 screw, you can try out other screws with a similar size like the screws present on a pencil sharpener.

Take a look under his and at 2:27. There is a small bag where you can see the standoff and screw. Then again at 3:25 BillyBuerger said:Why don't they just include at least one screw in the longest position so it's there ready to go and can be moved to whatever location is needed? Hello and first of all thank you to help us. I Have a Pavilion Desktop with the motherboard Willow2 ( https://support.hp.com/it-it/document/c05954013). I bought an additional SSD m.2 but to fix it I don't have the right screw. I tried to put a couple of small ones I had at home but it wasn't the right one. Do you maybe help me to discover which size that motherboard's screws need and also (if you know) where I can buy a couple of ones? it did, likely still in your motherboard box. Its usually a very small baggie with a single screw or stand off and screw. This would only not be present if it was a used motherboard or an open box that may not be guaranteed to have everything it would at full retail.