FibaFuse Paperless Drywall Tape by Norton Abrasives - St. Gobain

Product Information

If this were a scenario using paper tape, it would not have a good bond between the two products- I would have to use an all purpose compound which takes 24 hours to dry. With fibafuse, the compound and tape literally fuse together. I’m able to complete one patch in 1 half day, rather than 2-3 part time days while I wait for the compound to dry. Fibafuse is a newer product that was made to be stronger than paper tape, which it is. It is composed of glas mat fabric, which is basically a woven fiberglass. It eliminates possible bubbles just like mesh tape – but it is applied like paper tape. This means you have to first apply your joint compound, then your tape, then press it into the joint to “bed” it into the wall. Another perk of using Fibafuse is that because it is made of fiberglass, it is naturally mold resistant; which makes it a good choice for bathroom/kitchen repairs. This Sure Corner tape, in case the name didn’t convince you, is one of the better options for filling a corner bead due to its metal reinforcements. It nicely finishes an angle and creates straight drywall joints more than paper tape and is easily applied with drywall mud. Pro drywall installers often only use paper drywall tape, but it can pose a problem for DIYers who may use too little or too much compound. Such errors can result in the tape shifting or wrinkling or bubbles to appear on the tape’s surface. For speedy installation, rolls of paper tape are often fitted into drywall tape dispensers to allow installers to apply compound and tape at the same time.

Mesh tape is another type of drywall tape that was created to eliminate the need to apply a coat of joint compound before applying the tape. Mesh tapes are self-adhesive, meaning you are able to apply it to the joint first, then apply your mud. This is the second most widely used drywall joint tape in the industry. It is typically used for repairs or new construction. Thin drywall tape: Stronger than mesh drywall tape, thin tapes have self-adhesive and are a good option for larger jobs as it’s harder to tear and doesn’t leave the texture that mesh tapes tend to. It’s especially useful on butt joints and as it leaves a smooth junction.To any average person who doesn’t do drywall, you wouldn’t know the difference at first. Any time there is a joint in drywall (where two pieces of drywall meet) either paper tape, or mesh tape has been used with joint compound to bond them together. Fibafuse was created to be in the middle of paper and mesh, but is said to be stronger than paper. It’s not quite as rigid as corner bead, so if applying it to outside corners poses a problem, consider using regular corner bead in those spots. Like paper tape, this corner tape should be embedded in drywall compound. But, the slotted holes on the edges hold onto adhesive easily. It comes in a 100-foot roll. Though Fibafuse is still a good product, it can only be used on factory joints, butt joints, and minor repairs. It cannot be used on corners. Based on what I researched on the product, I found that they do say it can be used on corners. This is simply not true.

The surcharge areas are: Jersey, Guernsey, Scottish Highlands, Scottish Islands, Isle of Wight, Isle of Man, Scilly Isles, Inner London, Wales, Scotland, Cornwall Pros employ the first method, and for them, it’s faster. However, DIYers may find the non-adhesive tape slips around too much on the wet compound, making it difficult to position directly over the seam. Also, wrinkles may form in the tape that are difficult to smooth out. DIYers may prefer self-adhesive tape, because once it’s applied over the seam, it stays put. After that, installers smooth the compound over it, pushing the compound through the mesh surface and into the seam beneath. Inside vs. Outside Corners Paper tape still trumps this product by far on new construction. They do boast that it can reduce time repairing bubbles and blisters. But any experienced drywaller out there knows at this point how to avoid them. Paper tape is usually 50% cheaper than a roll of FibaFuse, and can be used on all phases of drywall taping. This is why I rate FibaFuse low for new construction. Here are a few of our common questions, hopefully they'll help you out. I'm not a tradesperson can I use your trade counter?In the world of professional taping, paper drywall tape is king. Paper drywall tape comes in rolls about 2 inches wide and anywhere from 50 to 200 feet long. Paper drywall tape is the thinnest tape, and the thinner the tape, the less visible the finished seam. This means that paper produces the smoothest possible seams—but only if used correctly. Paper tape is applied over a layer of wet joint compound used to fill a joint between drywall panels. The tape is embedded in the compound using a taping knife, and additional compound is smoothed over the tape to cover it.

This fee is high due to the length of all our items, being over 2m they are classed as 'ugly freight' by most couriers. No standard deliveries are made during the weekend but it is possible to pay extra for a Saturday AM delivery, at extra cost. Note that standard paper drywall tape comes with an embossed line down its center to create a crease to form a 90-degree angle for use in an inside corner. Use this same paper tape flat as described to tape joints in the center of the wall. As with flat seams, joint compound first must be applied to an inside corner, after which the tape is folded and embedded in the compound. Self-Adhesive Tape A handful of reinforced creased tape is labeled for use on both inside corners and outside corners, and this type should be embedded in compound. However, for novice tapers, a corner bead probably offers the best results on outside corners. Flexibility There may still be a payable surcharge for delivery to your area if you are in some areas of the UK which we wouldn't pay. **Creased paper drywall tape is usually used only on inside corners. There, flexible tape will likely fail to hold a sharp crease down the center. Outside corners are typically formed by installing rigid plastic or metal corner pieces over the drywall (called a “corner bead”), which are then attached with compound, adhesive, or even nails, depending on the type of bead. Many drywallers still agree that paper tape is the best product to use on new builds. This is not only due to the cost, but due to the fact that paper tape is much more versatile than FibaFuse. Metal drywall tape: Ideal for inside corners, metal tape contains metal strips that make it strong and easy to shape and apply. It is the most expensive option though, and can only be cut with strong snips, and leaves a clear texture under drywall compound. It’s also easy enough to apply for beginners who find it simple and straightforward to use. One shopper wrote, “It worked so well that I didn't really need to do a second coat after the taping coat.”